Re: Request for information

["Mooney, Tim M. via Tech-talk" <tech-talk@aps.anl.gov>]

Hi John,

I haven't studied the manual in too much detail, but this device looks like it can be run by software intended for the Keysight 33600 waveform generator, for which we coded the attached database when it was an Agilent product.  This probably doesn't do what you want, but it might be of some use anyway.

Tim Mooney (mooney@anl.gov) (630)252-5417
Beamline Controls Group (www.aps.anl.gov)
Advanced Photon Source, Argonne National Lab

---

From: tech-talk-bounces@aps.anl.gov <tech-talk-bounces@aps.anl.gov> on behalf of Sinclair, John William via Tech-talk <tech-talk@aps.anl.gov>
Sent: Tuesday, July 30, 2019 12:41 PM
To: tech-talk <tech-talk@aps.anl.gov>
Subject: Request for information

 

Hi all,

I am soliciting comments related to positive or negative experience communicating with a Keysight E8663D signal gererator. The devices talks SCPI over GPIB, RS232, and ethernet.

If anyone has develop a set of stream-device commands for community use, I would be very grateful if I could obtain a copy.

Thanks,

John Sinclair

SNS

Attachment: Agilent_33600A.db
Description: Agilent_33600A.db