Experimental Physics and
Industrial Control System

Try turning off the firewall on your pc

> On Aug 4, 2019, at 6:48 PM, Miceli, Antonino via Tech-talk <[email protected]> wrote:
> 
> Hi, 
> 
> We have an EPICS areadetector soft IOC (AD core 3.6) running on a Debian PC for a Lambda detector. We are trying to control with spec, but spec's epics_caget commands return errors (e.g., "Not Connected"). When we run caget from the PC running spec, it works fine. 
> 
> Any suggestions? I know this is not a spec mailing list, but I figure this is the next best thing!
> 
> Thanks, 
> Nino

Replies:

Re: spec epics_caget not working Mark Rivers via Tech-talk

References:

spec epics_caget not working Miceli, Antonino via Tech-talk

Navigate by Date:

Prev: Re: [motorPIGCS2] can't turn on servo state of PI E-712 Peterson, Kevin M. via Tech-talk

Next: Re: spec epics_caget not working Mark Rivers via Tech-talk

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  <2019>  2020  2021  2022  2023  2024 

Navigate by Thread:

Prev: Re: spec epics_caget not working Ralph Lange via Tech-talk

Next: Re: spec epics_caget not working Mark Rivers via Tech-talk

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  <2019>  2020  2021  2022  2023  2024