1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 <2020> 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 <2020> 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | Re: possibility of using areaDetector to drive Varax 4343 detector |
From: | "Miceli, Antonino via Tech-talk" <[email protected]> |
To: | "Rivers, Mark L." <[email protected]>, "ChenZhang@Gmail" <[email protected]> |
Cc: | "[email protected]" <[email protected]> |
Date: | Fri, 24 Jan 2020 19:58:38 +0000 |
Ted Lutzel <[email protected]> told me this about their software:
Use this link for the XRD 4343CT detectors:
https://vareximagpub.sharepoint.com/:u:/g/EakLzPppP_5GlNMaKft2Kh4BJ32zG-Ma8gfBHsGA5fPb2Q
Use this link for the XRD 0820, XRD0822, XRD 1622, XRD 1611, and XRD 1621 detectors:
https://vareximagpub.sharepoint.com/:f:/g/En2Fm4JX9t9Kkyo5ifUvmGABuUhkmHNCNiDWH64QEEL8sQ
Nino
From: Tech-talk <[email protected]> on behalf of ChenZhang@Gmail via Tech-talk <[email protected]>
Sent: Friday, January 24, 2020 1:54 PM To: Rivers, Mark L. <[email protected]> Cc: [email protected] <[email protected]> Subject: Re: possibility of using areaDetector to drive Varax 4343 detector The vendor software is called XIS (Windows), which allows us to write frames to a buffer, then manually save them to disk. We will contact the vendor to confirm if a different SDK is used for this new model.
Chen > On Jan 24, 2020, at 1:41 PM, Mark Rivers <[email protected]> wrote: > >> I was wondering if it would be possible to use areaDetector to drive Varax 4343. > > Do you know what software is provided with that detector? There are 2 areaDetector drivers for Varax flat panel detectors, ADPerkinElmer and ADDexela. Does the 4343 use the same SDK as either of these? > > Mark > > > -----Original Message----- > From: Tech-talk <[email protected]> On Behalf Of ChenZhang@Gmail via Tech-talk > Sent: Friday, January 24, 2020 1:26 PM > To: [email protected] > Subject: possibility of using areaDetector to drive Varax 4343 detector > > Hi All, > > We are trying to test the hardware triggering of Varax 4343 for HT-HEDM, and the vendor software does not support directly dumping frames from buffer to disk. I was wondering if it would be possible to use areaDetector to drive Varax 4343. > > Best, > Chen > — > Chen Zhang > Postdoc Researcher > Department of Mechanical Engineering > Colorado School of Mines > 1500 Illinois Street Golden, CO 80401 > > [email protected] > [email protected] > |