Dear Tang-san,
We are using Yokogawa WE7000 series via ethernet with EPICS at J-PARC Main Ring.
We are using 4 different WE7000 models, i.e., WE400, WE500, WE800, and
WE900. As far as I know, our device support treats those models in the
same way. Unfortunately, a couple of years ago, the one who developed
and maintained the device support left our site. Since then it is
working 'as is' basis, but we still have access to the source code.
So, could you please describe the symptom a bit more in detail?
> Is there anyone using WE500 YOKOGAWA measuring station with EPICS ?
>
> Our EPICS device driver support works with WE400 (Ethernet only) system but not work with WE500 (Ethernet and USB).
>
> We’d like to update existing driver to support both WE400/500 via Ethernet.
Best regards,
Shuei
--
----------------------------------------------------
Shuei Yamada,
High Energy Accelerator Research Organization (KEK)
mailto:shuei at post.kek.jp
----------------------------------------------------
- References:
- EPICS Device Driver for YOKOGAWA WE500 vs WE400 Tang, Johnny via Tech-talk
- Navigate by Date:
- Prev:
Re: streamdevice case sensitive sum8 checksum? Brown, Garth via Tech-talk
- Next:
phoebus forwarding macros Pierrick M Hanlet via Tech-talk
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
<2020>
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
EPICS Device Driver for YOKOGAWA WE500 vs WE400 Tang, Johnny via Tech-talk
- Next:
Building StreamDevice with PCRE failing Manoussakis, Adamandios via Tech-talk
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
<2020>
2021
2022
2023
2024
|