Re: EPICS Module mrfioc2

[Michael Davidsaver via Tech-talk <tech-talk at aps.anl.gov>]

On 1/26/21 2:42 AM, Abdalla Ahmad via Tech-talk wrote:
> Hi
> 
>  
> 
> I came across this module https://github.com/epics-modules/mrfioc2 <https://github.com/epics-modules/mrfioc2> when searching for a driver for MRM-based timing system hardware. Looking at the source code it does not seem to work with Ethernet connected hardware, only VME. Our timing system hardware is inserted into a VME chassis but connected to the control system via the board’s Ethernet interface.

> Can this driver be configured to connect to Ethernet-connected hardware?

No, only MMIO.  FYI. mrfioc2 makes use of VME/PCI interrupts, which
aren't a feature of MRF's network protocol.