EPICS Controls Argonne National Laboratory

Experimental Physics and
Industrial Control System

1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  <20212022  2023  2024  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  <20212022  2023  2024 
<== Date ==> <== Thread ==>

Subject: Re: Teledyne-Photometrics/PVCAM
From: Jörn Dreyer via Tech-talk <tech-talk at aps.anl.gov>
To: tech-talk at aps.anl.gov
Date: Fri, 26 Feb 2021 07:39:15 +0100
Hi Jhon,

I hope you are aware of, that the PVCAM linux SDK is 32bit only! At leasththe 
one that I got from piacton's ftp site.

I'm currently fighting to get the needed rspiusb driver running under a decent 
5.X kernbel. It was developped originaly for 2.6 and has not seen any updates 
since 2011 We have in total 4 PI-MTE cameras of the old generation. Not MTE3! 
These are only supported by PvCam while the MTE3 is supported by PICam.

Where did you get the new SDK from? If that would work with the ADPvCam code 
and use libusb instead of a kernel module it would help a lot to get our 
cameras working.

Jörn

Am Donnerstag, 25. Februar 2021, 22:19:38 CET schrieb John Dobbins via Tech-
talk:
> Mark,
> 
> I was able to download their SDK for Linux version 3.9.4.2.1 which has a
> date of Nov. 6 ,2020.  So that is hopeful.
> 
> John
> 
> ________________________________
> From: Mark Rivers <rivers at cars.uchicago.edu>
> Sent: Thursday, February 25, 2021 4:06 PM
> To: John Dobbins <john.dobbins at cornell.edu>
> Cc: tech-talk at aps.anl.gov <tech-talk at aps.anl.gov>
> Subject: RE: Teledyne-Photometrics/PVCAM
> 
> 
> Hi John,
> 
> 
> 
> It is true that ADPvCam has not seen much development in recent times.
> However, I view it as an important driver to continue to support and update
> to the current release of PVCAM, since Photometrics still makes useful
> cameras, and is planning to make some interesting new ones in the future.
> 
> 
> 
> Mark
> 
> 
> 
> 
> 
> From: Tech-talk <tech-talk-bounces at aps.anl.gov> On Behalf Of John Dobbins
> via Tech-talk Sent: Thursday, February 25, 2021 1:52 PM
> To: tech-talk at aps.anl.gov
> Subject: Teledyne-Photometrics/PVCAM
> 
> 
> 
> Teledyne-Photometrics cameras use PVCAM.  Looking at the documentation for
> areaDector PVCAM it wasn't obvious to me if people still use this for new
> cameras. Advice?
> 
> 
> 
> Thanks,
> 
> 
> 
> John Dobbins
> 
> 
> 
> Research Support Specialist
> 
> Cornell High Energy Synchrotron Source
> 
> Cornell University
> 
> 
> 
> www.chess.cornell.edu<http://www.chess.cornell.edu>




Replies:
Re: Teledyne-Photometrics/PVCAM John Dobbins via Tech-talk
Re: Teledyne-Photometrics/PVCAM Mark Rivers via Tech-talk
References:
Teledyne-Photometrics/PVCAM John Dobbins via Tech-talk
RE: Teledyne-Photometrics/PVCAM Mark Rivers via Tech-talk
Re: Teledyne-Photometrics/PVCAM John Dobbins via Tech-talk

Navigate by Date:
Prev: Re: Teledyne-Photometrics/PVCAM John Dobbins via Tech-talk
Next: Re: Teledyne-Photometrics/PVCAM John Dobbins via Tech-talk
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  <20212022  2023  2024 
Navigate by Thread:
Prev: Re: Teledyne-Photometrics/PVCAM John Dobbins via Tech-talk
Next: Re: Teledyne-Photometrics/PVCAM John Dobbins via Tech-talk
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  <20212022  2023  2024 
ANJ, 26 Feb 2021 Valid HTML 4.01! · Home · News · About · Base · Modules · Extensions · Distributions · Download ·
· Search · EPICS V4 · IRMIS · Talk · Bugs · Documents · Links · Licensing ·