Experimental Physics and
Industrial Control System

Hi Heinz,

EPICS 7 works with powerpc64-linux, but you have to create your own
base configuration file according to your hardware and the
corresponding cross-compiler. The specific board which I worked on is
PowerPC64 e6500. The base configuration file is the following link,
and I failed to convince Andrew to put them into the base repository
due to a lack of my knowledge.

https://github.com/jeonghanlee/e3-base-4-timo/blob/master/configure/os/CONFIG_SITE.Common.linux-ppc64e6500

And most EPICS modules works also.

HTH,
Han


On Wed, Mar 31, 2021 at 8:47 AM Heinz Junkes via Tech-talk
<tech-talk at aps.anl.gov> wrote:
>
> Hallo,
> has anyone got Epics 7 working for powerpc64-linux yet?
>
> Danke Heinz
>

References:

epics support for powerpc64-linux Heinz Junkes via Tech-talk

Navigate by Date:

Prev: epics support for powerpc64-linux Heinz Junkes via Tech-talk

Next: Re: epics support for powerpc64-linux Torsten Bögershausen via Tech-talk

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  <2021>  2022  2023  2024 

Navigate by Thread:

Prev: epics support for powerpc64-linux Heinz Junkes via Tech-talk

Next: Re: epics support for powerpc64-linux Torsten Bögershausen via Tech-talk

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  <2021>  2022  2023  2024