Experimental Physics and
Industrial Control System

Hi Lynn,


You can look at these 2 files to see how this is handled in asyn:


https://github.com/epics-modules/asyn/blob/master/configure/CONFIG_SITE

https://github.com/epics-modules/asyn/blob/master/asyn/Makefile


Mark


________________________________
From: Tech-talk <tech-talk-bounces at aps.anl.gov> on behalf of 网易邮件中心 via Tech-talk <tech-talk at aps.anl.gov>
Sent: Thursday, July 22, 2021 9:03 PM
To: tech-talk at aps.anl.gov
Subject: no rpc.h, ALH

Hi,
    I met some question when install the alh extension.

    The error was:   no  “rpc/rpc.h”  file  when install alh.
    I use cenots 8 64, base7.0.6 and ALH downloaded from alh/documentation at master ・ epics-extensions/alh (github.com)<https://github.com/epics-extensions/alh/tree/master/documentation>, it might be

    I think it might be the libtripc, but i could not find how to modify it.

Regards,
Lynn

References:

no rpc.h, ALH 网易邮件中心 via Tech-talk

Navigate by Date:

Prev: Re: no rpc.h, ALH Matt Clarke via Tech-talk

Next: Channel Access Timeouts - ca(get|put) CA Priority Yendell, Gary (DLSLtd, RAL, LSCI) via Tech-talk

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  <2021>  2022  2023  2024 

Navigate by Thread:

Prev: Re: no rpc.h, ALH Matt Clarke via Tech-talk

Next: Channel Access Timeouts - ca(get|put) CA Priority Yendell, Gary (DLSLtd, RAL, LSCI) via Tech-talk

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  <2021>  2022  2023  2024