EPICS Controls Argonne National Laboratory

Experimental Physics and
Industrial Control System

1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  <20212022  2023  2024  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  <20212022  2023  2024 
<== Date ==> <== Thread ==>

Subject: Re: Motor record support for Prevac SMCD14 stepper motor controller
From: "Ovsyannikov, Ruslan via Tech-talk" <tech-talk at aps.anl.gov>
To: Laurenz Rettig <rettig at fhi-berlin.mpg.de>, "tech-talk at aps.anl.gov" <tech-talk at aps.anl.gov>
Date: Thu, 9 Sep 2021 08:47:36 +0000

Dear Laurenz,

 

Thanks, I am definitely interested!

 

Did I understood correctly that you do not directly communicate with the motor controllers from your motor driver but use  Prevac windows driver dll as backend to handle the communication?

SMCD14s  have a Modbus over TCP interface and I had in mind to operate them directly from an IOC bypassing any parts of the Prevac software. Did you have a look into this option  for  your SMCD10/12s?

 

Best,

Ruslan

 

From: Tech-talk <tech-talk-bounces at aps.anl.gov> on behalf of Laurenz Rettig via Tech-talk <tech-talk at aps.anl.gov>
Reply to: Laurenz Rettig <rettig at fhi-berlin.mpg.de>
Date: Wednesday, 8. September 2021 at 16:07
To: "tech-talk at aps.anl.gov" <tech-talk at aps.anl.gov>
Subject: Re: Motor record support for Prevac SMCD14 stepper motor controller

 

Dear Ruslan,

I've been working on a motor driver for the SMCD10/12 motor controllers based on Prevac's Windows driver dll interface. It's not quite finished yet, but a good start. If you are interested and this is an option for you, I could share the current state of the project.

Best, Laurenz

On 08.09.2021 14:33, Ovsyannikov, Ruslan via Tech-talk wrote:

Dear all,

 

Does anyone have a support module for the Prevac SMCD14 stepper motor controllers?

 

Ruslan

 



Helmholtz-Zentrum Berlin für Materialien und Energie GmbH

Mitglied der Hermann von Helmholtz-Gemeinschaft Deutscher Forschungszentren e.V.

Aufsichtsrat: Vorsitzender Dr. Volkmar Dietz, stv. Vorsitzende Dr. Jutta Koch-Unterseher
Geschäftsführung: Prof. Dr. Jan Lüning (Sprecher), Prof. Dr. Bernd Rech, Thomas Frederking

Sitz Berlin, AG Charlottenburg, 89 HRB 5583

Postadresse:
Hahn-Meitner-Platz 1
14109 Berlin
Deutschland

-- 
Dr. Laurenz Rettig                  rettig at fhi-berlin.mpg.de
Emmy Noether Research Group Dynamics of Correlated Materials
Fritz Haber Institute of the Max Planck Society
Department of Physical Chemistry
Faradayweg 4-6                         Tel: +49 30 8413 5225
14195 Berlin, Germany                  Fax: +49 30 8413-5387

Attachment: smime.p7s
Description: S/MIME cryptographic signature


References:
Motor record support for Prevac SMCD14 stepper motor controller Ovsyannikov, Ruslan via Tech-talk
Re: Motor record support for Prevac SMCD14 stepper motor controller Laurenz Rettig via Tech-talk

Navigate by Date:
Prev: Re: Motor record support for Prevac SMCD14 stepper motor controller Laurenz Rettig via Tech-talk
Next: Cannot build StreamDevice on Windows 64bit Lehmeyer, Johannes via Tech-talk
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  <20212022  2023  2024 
Navigate by Thread:
Prev: Re: Motor record support for Prevac SMCD14 stepper motor controller Laurenz Rettig via Tech-talk
Next: Cannot build StreamDevice on Windows 64bit Lehmeyer, Johannes via Tech-talk
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  <20212022  2023  2024 
ANJ, 09 Sep 2021 Valid HTML 4.01! · Home · News · About · Base · Modules · Extensions · Distributions · Download ·
· Search · EPICS V4 · IRMIS · Talk · Bugs · Documents · Links · Licensing ·