Dear Paul,
> AFter more than a decade of service we will be retiring our Channel Archiver and begin using the Archiver Appliance. Is there a tool to migrate/move data out of the Channel Archiver and put it into the data stores of the Archiver Appliance?
Yes, there are at least two, arget (part of carchivetools) and ca2aa.
You can find both of them in github:
https://github.com/epicsdeb/carchivetools
https://github.com/mdavidsaver/ca2aa
cf. https://indico.fnal.gov/event/9718/contributions/115209/attachments/74704/
We used arget to convert our 10-years of Channel Archiver data to AA
in 2017. I tested both and found that ca2aa works much faster but
arget is suitable for our site because it retrieves a PV stored in
multiple keys.
Best regards,
Shuei
--
----------------------------------------------------
Shuei Yamada,
High Energy Accelerator Research Organization (KEK/J-PARC)
mailto:shuei at post.kek.jp
----------------------------------------------------
- Replies:
- Re: Channel Archiver data into Archiver Appliance? Hu, Yong via Tech-talk
- References:
- Channel Archiver data into Archiver Appliance? Paul Sichta via Tech-talk
- Navigate by Date:
- Prev:
RE: ADAravis multiple image mode fail for Basler raL12288-8gm Mark Rivers via Tech-talk
- Next:
Does EPICS support MVME3100 under Linux? Dmitry Yu. Bolkhovityanov via Tech-talk
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
<2021>
2022
2023
2024
- Navigate by Thread:
- Prev:
Channel Archiver data into Archiver Appliance? Paul Sichta via Tech-talk
- Next:
Re: Channel Archiver data into Archiver Appliance? Hu, Yong via Tech-talk
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
<2021>
2022
2023
2024
|