Experimental Physics and
Industrial Control System

1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 <2022> 2023 2024	Index	1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 <2022> 2023 2024
<== Date ==>		<== Thread ==>

Subject:	Re: integration with GroovEPIC PLC?
From:	Ralph Lange via Tech-talk <tech-talk at aps.anl.gov>
To:	EPICS Tech Talk <tech-talk at aps.anl.gov>
Date:	Thu, 20 Oct 2022 11:10:55 +0200

On Wed, 19 Oct 2022 at 20:00, Paul Sichta via Tech-talk <tech-talk at aps.anl.gov> wrote:

Has anyone integrated the GroovEPIC control product from OPTO22 ? They offer an OPC DA server, so I plan to use that unless there is another method.

Just be aware that there is OPC (Classic) DA and the newer (and preferable) OPC UA, which also implements the DA part of the original OPC spec.

Cheers,
~Ralph

References:: integration with GroovEPIC PLC? Paul Sichta via Tech-talk

Navigate by Date:: Prev: Re: [EXTERNAL] Re: Db/Makefile infinite loop Simon Rose via Tech-talk; Next: Re: Db/Makefile infinite loop Simon Rose via Tech-talk; Index: 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 <2022> 2023 2024
Navigate by Thread:: Prev: integration with GroovEPIC PLC? Paul Sichta via Tech-talk; Next: Question about extracting information from a bo type record in EPICS Meddage, Varuna via Tech-talk; Index: 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 <2022> 2023 2024

ANJ, 20 Oct 2022