Experimental Physics and
Industrial Control System

1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 <2024>	Index	1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 <2024>
<== Date ==>		<== Thread ==>

Subject:	How to automatically update a phoebus X/Y Plot
From:	Alejandro Del Moral via Tech-talk <tech-talk at aps.anl.gov>
To:	"tech-talk at aps.anl.gov" <tech-talk at aps.anl.gov>
Date:	Fri, 3 May 2024 10:15:29 +0000

Hello,

I am working with the phoebus framework, where I use an X/Y Plot to plot a series of pressure values (taken from sensors) over a distance.

The thing is that the plot is not updated automatically, but every time I reload the page.

Let's see if you can give me a hand to update the values of the sensors in the graph automatically.

Thanks in advance.

Best regards,

Alejandro

Navigate by Date:: Prev: CSS/Phoebus XY plotting using data retrieved from Archiver Appliance Shen, Guobao via Tech-talk; Next: Re: How to achive a huge number of PVs in Archive Appliance William Kirstaedter via Tech-talk; Index: 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 <2024>
Navigate by Thread:: Prev: CSS/Phoebus XY plotting using data retrieved from Archiver Appliance Shen, Guobao via Tech-talk; Next: EPICS Installation Woes Jonathan Hai via Tech-talk; Index: 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 <2024>

ANJ, 06 May 2024