Re: IOC for Tektronix DAQ6510?

[Mark Rivers via Tech-talk <tech-talk@aps.anl.gov>]

Hi  Jeffrey,

The support for the Keithley 2700/7700 is likely to either work out of the box or with slight modifications.

It consists of these database and autosave files:

https://github.com/epics-modules/ip/blob/master/ipApp/Db/Keithley2kDMM20.db

https://github.com/epics-modules/ip/blob/master/ipApp/Db/Keithley2kDMM20_settings.req

https://github.com/epics-modules/ip/blob/master/ipApp/Db/Keithley2kDMM_channelN_settings.req

This SNL program:

https://github.com/epics-modules/ip/blob/master/ipApp/src/Keithley2kDMM_mf40.st

And  medm files in this directory that start with "Keithley2kDMM"

https://github.com/epics-modules/ip/tree/master/ipApp/op/adl

Mark

---

From: Tech-talk <tech-talk-bounces@aps.anl.gov> on behalf of Jeffrey Gamsby via Tech-talk <tech-talk@aps.anl.gov>
Sent: Monday, December 9, 2024 10:29 PM
To: tech-talk@aps.anl.gov <tech-talk@aps.anl.gov>
Subject: IOC for Tektronix DAQ6510?

 

We purchased a Tektronix DAQ6510 with a 20 channel keithley 7710 module that we would like to run using EPICS. Does anyone know if an IOC for it or something similar exists?