RE: Eaton UPS Network-M3

[Freddie Akeroyd - STFC UKRI via Tech-talk <tech-talk at aps.anl.gov>]

Hi Bo,

It looks like the UPS supports SNMP  "MIB II – Standard IETF UPS MIB (RFC 1628) – Eaton xUPS MIB" so if it exposes the information you need by this route you should be able to monitor using the EPICS SNMP module  https://urldefense.us/v3/__https://groups.frib.msu.edu/controls/files/devSnmp.html__;!!G_uCfscf7eWS!dlxa2rKzQLDGdYbWcInez0AVIfntphYEDOxl4mAWkjnBkjEiVDRrp5IR_eQc7HqqDFvslT5MbKHY3UEk5wZFl_VVb-rN-XOU0XM$ 

Regards,

Freddie

-----Original Message-----
From: Tech-talk <tech-talk-bounces at aps.anl.gov> On Behalf Of boj via Tech-talk
Sent: 28 May 2025 10:43
To: tech-talk at aps.anl.gov
Subject: Eaton UPS Network-M3

Dear all

I am upgrading out labs with Eaton UPS's (9PX 3000) which I have got with the Netwoek-m3 ethernet card.

I was hoping to implement EPICS support for logging the status, but unfortunately it does not seems to be straight forward as the web interface does not have a simple API.

So I would like to hear if anyone here has attempted communication with such EATON Ups's

Best regards

Bo