hi,
I need to implement a function for insertion device like this:
Read a two-dimensions table file from the disk, which is values for gap positions and Correction coil power supplies (one gap value corresponding to 4 power supply value). If a gap position is set from the operator, four power supplies will be set automatically.
I want to use SNC language to do this, for reading the data from disk, use an asub record for it. Is it ok? Is there any better ways? Did anyone finish this job before?
Any suggestions are appreciated.
Best regards
Geyang 2010-10-21
- Replies:
- Re: Lookup table problem Maren Purves
- RE: Lookup table problem austen.rose
- RE: Lookup table problem Dalesio, Leo
- Re: Lookup table problem Steven M. Hartman
- Re: Lookup table problem Tim Mooney
- Navigate by Date:
- Prev:
Re: Manipulating time in records Luedeke Andreas
- Next:
RE: Manipulating time in records Di Maio Franck
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
<2010>
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: Epics C# Library - questions Alain Bertrand
- Next:
Re: Lookup table problem Maren Purves
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
<2010>
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|