Experimental Physics and
Industrial Control System

"Mercado, Ronaldo \(DLSLtd, RAL, LSCI\) via Tech-talk" <[email protected]> · Thu, 21 Nov 2019 11:57:02 +0000

Hi,

I am familiar with the Zebra. I believe it can do what you are asking for.

https://quantumdetectors.com/n/products/zebra/ 

The device came out of Diamond's requirements and there's a link to the 2013 icalepcs zebra paper on the link above.

Regards,
Ronaldo

Diamond 

-----Original Message-----
From: Tech-talk <[email protected]> On Behalf Of Nilson Pereira via Tech-talk
Sent: 21 November 2019 10:21
To: [email protected]
Subject: Suggestions for trigger manager device

Hi there.

I am looking for some suggestions for a device that would let me (through epics) choose between different sources of pulse triggers.

In our beamline, we have a delay generator (DG645) from SRS to synchronize multiple devices during acquisition with 1 input and 4 outputs. Since we have different devices that act as trigger source on different experiments, our solution now is to change cables that connects to our single input of the delay generator.

Is there a device with EPICS support that would allow me to manage this triggering source?

Thank you.

Nilson Pereira.

________________________________

Helmholtz-Zentrum Berlin für Materialien und Energie GmbH

Mitglied der Hermann von Helmholtz-Gemeinschaft Deutscher Forschungszentren e.V.

Aufsichtsrat: Vorsitzender Dr. Volkmar Dietz, stv. Vorsitzende Dr. Jutta Koch-Unterseher
Geschäftsführung: Prof. Dr. Bernd Rech (Sprecher), Prof. Dr. Jan Lüning, Thomas Frederking

Sitz Berlin, AG Charlottenburg, 89 HRB 5583

Postadresse:
Hahn-Meitner-Platz 1
D-14109 Berlin

-- 
This e-mail and any attachments may contain confidential, copyright and or privileged material, and are for the use of the intended addressee only. If you are not the intended addressee or an authorised recipient of the addressee please notify us of receipt by returning the e-mail and do not use, copy, retain, distribute or disclose the information in or attached to the e-mail.
Any opinions expressed within this e-mail are those of the individual and not necessarily of Diamond Light Source Ltd. 
Diamond Light Source Ltd. cannot guarantee that this e-mail or any attachments are free from viruses and we cannot accept liability for any damage which you may sustain as a result of software viruses which may be transmitted in or with the message.
Diamond Light Source Limited (company no. 4375679). Registered in England and Wales with its registered office at Diamond House, Harwell Science and Innovation Campus, Didcot, Oxfordshire, OX11 0DE, United Kingdom

Experimental Physics and Industrial Control System

Experimental Physics and
Industrial Control System