Thank you all for the suggestions for a trigger device manager.
In summary, the options were:
- zync board (EPICS softGlueZync)
- Custom device from ospreydcs.com
- electrostandards - Model 7215 relay switch with RS232 control
- Panda box (125 MHz clock)
- Zebra box (50 MHz clock)
My requirements are really low since I just want to route a slow triggering system (2 Hz max). Although the relay switch could work for this application, I will take a look at the zyncFPGA board with EPICS softGlueZync. This solution might offer other possibilities
for further improvements in the future.
Thank you all.
Best,
Nilson
On 21.11.19 17:25, Mooney, Tim M. via Tech-talk wrote:
softGlueZynq will do this. If there is a jitter requirement less than 10 ns, you will have to synchronize softGlueZynq's clocks to the master clock that generates the signals you're selecting among, or at least to a clock derived from that master clock.
Although this capability is working at two stations at APS, it's probably best viewed as a research project. The github version of softGlueZynq doesn't have it yet.
Hi there.
I am looking for some suggestions for a device that would let me
(through epics) choose between different sources of pulse triggers.
In our beamline, we have a delay generator (DG645) from SRS to
synchronize multiple devices during acquisition with 1 input and 4
outputs. Since we have different devices that act as trigger source on
different experiments, our solution now is to change cables that
connects to our single input of the delay generator.
Is there a device with EPICS support that would allow me to manage this
triggering source?
Thank you.
Nilson Pereira.
________________________________
Helmholtz-Zentrum Berlin für Materialien und Energie GmbH
Mitglied der Hermann von Helmholtz-Gemeinschaft Deutscher Forschungszentren e.V.
Aufsichtsrat: Vorsitzender Dr. Volkmar Dietz, stv. Vorsitzende Dr. Jutta Koch-Unterseher
Geschäftsführung: Prof. Dr. Bernd Rech (Sprecher), Prof. Dr. Jan Lüning, Thomas Frederking
Sitz Berlin, AG Charlottenburg, 89 HRB 5583
Postadresse:
Hahn-Meitner-Platz 1
D-14109 Berlin
Helmholtz-Zentrum Berlin für Materialien und Energie GmbH
Mitglied der Hermann von Helmholtz-Gemeinschaft Deutscher Forschungszentren e.V.
Aufsichtsrat: Vorsitzender Dr. Volkmar Dietz, stv. Vorsitzende Dr. Jutta Koch-Unterseher
Geschäftsführung: Prof. Dr. Bernd Rech (Sprecher), Prof. Dr. Jan Lüning, Thomas Frederking
Sitz Berlin, AG Charlottenburg, 89 HRB 5583
Postadresse:
Hahn-Meitner-Platz 1
D-14109 Berlin
- References:
- Suggestions for trigger manager device Nilson Pereira via Tech-talk
- Re: Suggestions for trigger manager device Mooney, Tim M. via Tech-talk
- Navigate by Date:
- Prev:
Re: softIoc and softIocPVA in EPICS7 Michael Davidsaver via Tech-talk
- Next:
Re: softIoc and softIocPVA in EPICS7 Jeong Han Lee via Tech-talk
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
<2019>
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: Suggestions for trigger manager device Mooney, Tim M. via Tech-talk
- Next:
softIoc and softIocPVA in EPICS7 Jeong Han Lee via Tech-talk
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
<2019>
2020
2021
2022
2023
2024
|