Experimental Physics and
Industrial Control System

Heinz Junkes via Tech-talk <tech-talk at aps.anl.gov> · Wed, 24 Jan 2024 10:24:04 +0100

Hello Baeg,
we use MVME3100 and MVME6100 in combination with the MAXv controller cards.
Both cpu’s with RTEMS5/6 and Epics7. In my opinion, the clock frequency of the CPU is irrelevant
as the motor 'intelligence' is on the MAXv card.

Heinz
------------------------------------------------------------------------------
Fritz-Haber-Institut    | Phone:         (+49 30) 8413-4270
Heinz Junkes             | Fax (G3+G4):   (+49 30) 8413-5900
Faradayweg 4-6        | VC: https://zoom.fhi.berlin/junkes
D - 14195 Berlin        | E-Mail:        junkes at fhi-berlin.mpg.de
------------------------------------------------------------------------------

> On 24. Jan 2024, at 02:43, 백호령 via Tech-talk <tech-talk at aps.anl.gov> wrote:
>
>
> Hello, I'd like to ask you about mvme3100 and epics versions and synapses versions.
> First, we configured the motor control system using the mvme6100 and maxv controller.
> However, we want to build a new motor control system as the production of the mvme6100 is lost.
> Currently, the available cpu is mvme3100, and this cpu is compatible with version 6.9 of vxworks, so we want to select it.
> However, before I choose, I would like to ask for your advice if the mvme3100 model is also available in epics base 3.15.9 and synApps 6-1, and motor-R7-1.
>
> And, for MME6100, the clock count is 1.2Ghz, and for MME3100, the clock count is 500Ghz. The clock count is more than double, is there any problem with motor control?
>
> There are many things I don't know because I'm a junior in the field. Please give me advice and teaching.
>
> Best&Regards.
> Baeg

smime.p7s

Experimental Physics and Industrial Control System

Experimental Physics and
Industrial Control System