I am going to rebuild everything to see if that helps.
Mark
________________________________
From: Michael Davidsaver <mdavidsaver at gmail.com>
Sent: Wednesday, June 3, 2020 6:34 PM
To: Mark Rivers
Cc: 'Johnson, Andrew N.'; core-talk at aps.anl.gov
Subject: Re: Problem booting vxWorks with base 7.0.4
Unfortunately no. I don't think that either discoverInterfaces() from pvAccess or
osiSockDiscoverBroadcastAddresses() from libCom has changed in 7.0.4
I'm perfectly willing to allow for bugs in discoverInterfaces(),
but I can't say I've seen this before.
> osiLocalAddr(): SIOCGIFCONF ioctl failed because "S_errno_ENXIO"
On 6/3/20 4:25 PM, Mark Rivers via Core-talk wrote:
> Hi Andrew,
>
>
> I just updated one of my vxWorks IOCs to base 7.0.4. It is failing to boot correctly. I get these errors after iocInit. This IOC was running fine with base 7.0.3.1.
>
>
>
> reboot_restore: done with file 'auto_settings.sav'
>
> discoverInterfaces(): unable to fetch network interface configuration
> 2020-06-03T23:19:10.507 Failed to introspect interfaces or no network interfaces available.
> 2020-06-03T23:19:10.507 No client broadcast addresses found or specified - empty address list!
> osiSockDiscoverBroadcastAddresses(): unable to fetch network interface configuration (-1)
> Warning: RSRV has empty beacon address list
> iocRun: All initialization complete
> discoverInterfaces(): unable to fetch network interface configuration
> 0xbe8d80 (tShell0): Unhandled C++ exception resulted in call to terminate
> osiSockDiscoverBroadcastAddresses(): unable to fetch network interface configuration (-1)
> osiSockDiscoverBroadcastAddresses(): unable to fetch network interface configuration (-1)
>
>
> osiLocalAddr(): SIOCGIFCONF ioctl failed because "S_errno_ENXIO"
>
>
> Any idea what is wrong?
>
>
> Thanks,
> Mark
>
>
> The complete IOC boot is below.
>
>
>
>
>
>
> boot device : dc
> unit number : 0
> processor number : 0
> host name : corvette
> file name : /usr/local/vw/VX6941/mv2700-dev6-debug
> inet on ethernet (e) : 164.54.160.94:ffffff00
> host inet (h) : 164.54.160.82
> user (u) : iocboot
> flags (f) : 0x0
> target name (tn) : ioc13idc
> startup script (s) : /home/epics/support/CARS/iocBoot/ioc13idc/st.cmd
>
> Attached TCP/IP interface to dc0.
> Attaching network interface lo0... done.
> Loading... 2228656
> Starting at 0x100000...
>
> Booting mv2700...
>
> Adding 6996 symbols for standalone.
>
>
> ]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
> ]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
> ]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
> ]]]]]]]]]]] ]]]] ]]]]]]]]]] ]] ]]]] (R)
> ] ]]]]]]]]] ]]]]]] ]]]]]]]] ]] ]]]]
> ]] ]]]]]]] ]]]]]]]] ]]]]]] ] ]] ]]]]
> ]]] ]]]]] ] ]]] ] ]]]] ]]] ]]]]]]]]] ]]]] ]] ]]]] ]] ]]]]]
> ]]]] ]]] ]] ] ]]] ]] ]]]]] ]]]]]] ]] ]]]]]]] ]]]] ]] ]]]]
> ]]]]] ] ]]]] ]]]]] ]]]]]]]] ]]]] ]] ]]]] ]]]]]]] ]]]]
> ]]]]]] ]]]]] ]]]]]] ] ]]]]] ]]]] ]] ]]]] ]]]]]]]] ]]]]
> ]]]]]]] ]]]]] ] ]]]]]] ] ]]] ]]]] ]] ]]]] ]]]] ]]]] ]]]]
> ]]]]]]]] ]]]]] ]]] ]]]]]]] ] ]]]]]]] ]]]] ]]]] ]]]] ]]]]]
> ]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
> ]]]]]]]]]]]]]]]]]]]]]]]]]]]]] Development System
> ]]]]]]]]]]]]]]]]]]]]]]]]]]]]
> ]]]]]]]]]]]]]]]]]]]]]]]]]]] VxWorks 6.9
> ]]]]]]]]]]]]]]]]]]]]]]]]]] KERNEL: WIND version 2.13
> ]]]]]]]]]]]]]]]]]]]]]]]]] Copyright Wind River Systems, Inc., 1984-2014
>
> CPU: Motorola MVME2700 - MPC 750. Processor #0.
> Memory Size: 0x8000000 (128Mb). BSP version 2.0/3-dev6-debug.
> Created: Jul 27 2015 17:59:12
> ED&R Policy Mode: Deployed
> WDB Comm Type: WDB_COMM_END
> WDB: Agent Disabled.
>
> VxWorks 6.9.4.1 on Motorola MVME2700 - MPC 750
> BSP version 2.0/3-dev6-debug built Jul 27 2015 17:59:12
>
> NOTICE TO USERS
>
> This is a Federal computer system and is the property of the United
> States Government. It is for authorized use only. Users (authorized
> or unauthorized) have no explicit or implicit expectation of privacy.
> Any or all uses of this system and all files on this system may be
> intercepted, monitored, recorded, copied, audited, inspected, and
> disclosed to authorized site, Department of Energy, and law enforcement
> personnel, as well as authorized officials of other agencies, both
> domestic and foreign. By using this system, the user consents to such
> interception, monitoring, recording, copying, auditing, inspection, and
> disclosure at the discretion of authorized site or Department of Energy
> personnel. Unauthorized or improper use of this system may result in
> administrative disciplinary action and civil and criminal penalties. By
> continuing to use this system you indicate your awareness of and consent
> to these terms and conditions of use. LOG OFF IMMEDIATELY if you do
> not agree to the conditions stated in this warning.
>
> apsShellInit: Suspending telnet task ipcom_telnetd (0xbbed60)
> Opening startup script /home/epics/support/CARS/iocBoot/ioc13idc/st.cmd ... Ok
>
> # vxWorks startup file
> < cdCommands
> startup = "/home/epics/support/CARS/iocBoot/ioc13idc"
> New symbol "startup" added to kernel symbol table.
> startup = 0xbec250: value = 12501664 = 0xbec2a0 = startup + 0x50
> putenv("IOC=ioc13idc")
> value = 0 = 0x0
> top = "/home/epics/support/CARS"
> New symbol "top" added to kernel symbol table.
> top = 0xbec320: value = 12501872 = 0xbec370 = 'p' = top + 0x50
> putenv("TOP=/home/epics/support/CARS")
> value = 0 = 0x0
> topbin = "/home/epics/support/CARS/bin/vxWorks-ppc32"
> New symbol "topbin" added to kernel symbol table.
> topbin = 0xbec420: value = 12502688 = 0xbec6a0 = topbin + 0x280
> support = "/corvette/home/epics/support"
> New symbol "support" added to kernel symbol table.
> support = 0xbec6e0: value = 12502832 = 0xbec730 = '0' = support + 0x50
> putenv("SUPPORT=/corvette/home/epics/support")
> value = 0 = 0x0
> supportbin = "/corvette/home/epics/support/bin/vxWorks-ppc32"
> New symbol "supportbin" added to kernel symbol table.
> supportbin = 0xbec7f0: value = 12503104 = 0xbec840 = '@' = supportbin + 0x50
> allen_bradley = "/corvette/home/epics/support/allenBradley-2-3"
> New symbol "allen_bradley" added to kernel symbol table.
> allen_bradley = 0xbec880: value = 12503264 = 0xbec8e0 = allen_bradley + 0x60
> putenv("ALLEN_BRADLEY=/corvette/home/epics/support/allenBradley-2-3")
> value = 0 = 0x0
> area_detector = "/corvette/home/epics/support/areaDetector-3-8"
> New symbol "area_detector" added to kernel symbol table.
> area_detector = 0xbec9d0: value = 12503600 = 0xbeca30 = '0' = area_detector + 0x60
> putenv("AREA_DETECTOR=/corvette/home/epics/support/areaDetector-3-8")
> value = 0 = 0x0
> asyn = "/corvette/home/epics/support/asyn-4-38"
> New symbol "asyn" added to kernel symbol table.
> asyn = 0xbeb290: value = 12497632 = 0xbeb2e0 = asyn + 0x50
> putenv("ASYN=/corvette/home/epics/support/asyn-4-38")
> value = 0 = 0x0
> asynbin = "/corvette/home/epics/support/asyn-4-38/bin/vxWorks-ppc32"
> New symbol "asynbin" added to kernel symbol table.
> asynbin = 0xbeb3c0: value = 12497936 = 0xbeb410 = asynbin + 0x50
> adsupport = "/corvette/home/epics/support/areaDetector-3-8/ADSupport"
> New symbol "adsupport" added to kernel symbol table.
> adsupport = 0xbeb460: value = 12498096 = 0xbeb4b0 = adsupport + 0x50
> putenv("ADSUPPORT=/corvette/home/epics/support/areaDetector-3-8/ADSupport")
> value = 0 = 0x0
> adsupportbin = "/corvette/home/epics/support/areaDetector-3-8/ADSupport/bin/vxWorks-ppc32"
> New symbol "adsupportbin" added to kernel symbol table.
> adsupportbin = 0xbeb5d0: value = 12498480 = 0xbeb630 = '0' = adsupportbin + 0x60
> adcore = "/corvette/home/epics/support/areaDetector-3-8/ADCore"
> New symbol "adcore" added to kernel symbol table.
> adcore = 0xbeb690: value = 12498656 = 0xbeb6e0 = adcore + 0x50
> putenv("ADCORE=/corvette/home/epics/support/areaDetector-3-8/ADCore")
> value = 0 = 0x0
> autosave = "/corvette/home/epics/support/autosave-5-10"
> New symbol "autosave" added to kernel symbol table.
> autosave = 0xbeb7d0: value = 12498976 = 0xbeb820 = ' ' = autosave + 0x50
> putenv("AUTOSAVE=/corvette/home/epics/support/autosave-5-10")
> value = 0 = 0x0
> autosavebin = "/corvette/home/epics/support/autosave-5-10/bin/vxWorks-ppc32"
> New symbol "autosavebin" added to kernel symbol table.
> autosavebin = 0xbeb920: value = 12499312 = 0xbeb970 = 'p' = autosavebin + 0x50
> busy = "/corvette/home/epics/support/busy-1-7-2"
> New symbol "busy" added to kernel symbol table.
> busy = 0xbeb9c0: value = 12499472 = 0xbeba10 = busy + 0x50
> putenv("BUSY=/corvette/home/epics/support/busy-1-7-2")
> value = 0 = 0x0
> busybin = "/corvette/home/epics/support/busy-1-7-2/bin/vxWorks-ppc32"
> New symbol "busybin" added to kernel symbol table.
> busybin = 0xbebaf0: value = 12499776 = 0xbebb40 = '@' = busybin + 0x50
> calc = "/corvette/home/epics/support/calc-3-7-3"
> New symbol "calc" added to kernel symbol table.
> calc = 0xbebb90: value = 12499936 = 0xbebbe0 = calc + 0x50
> putenv("CALC=/corvette/home/epics/support/calc-3-7-3")
> value = 0 = 0x0
> calcbin = "/corvette/home/epics/support/calc-3-7-3/bin/vxWorks-ppc32"
> New symbol "calcbin" added to kernel symbol table.
> calcbin = 0xbebcc0: value = 12500240 = 0xbebd10 = calcbin + 0x50
> sncseq = "/corvette/home/epics/support/seq-2-2-5"
> New symbol "sncseq" added to kernel symbol table.
> sncseq = 0xbebd60: value = 12500400 = 0xbebdb0 = sncseq + 0x50
> putenv("SNCSEQ=/corvette/home/epics/support/seq-2-2-5")
> value = 0 = 0x0
> sncseqbin = "/corvette/home/epics/support/seq-2-2-5/bin/vxWorks-ppc32"
> New symbol "sncseqbin" added to kernel symbol table.
> sncseqbin = 0xbebca0: value = 12510992 = 0xbee710
> sscan = "/corvette/home/epics/support/sscan-2-11-3"
> New symbol "sscan" added to kernel symbol table.
> sscan = 0xbee760: value = 12511152 = 0xbee7b0 = sscan + 0x50
> putenv("SSCAN=/corvette/home/epics/support/sscan-2-11-3")
> value = 0 = 0x0
> deviocstats = "/corvette/home/epics/support/devIocStats-3-1-16"
> New symbol "deviocstats" added to kernel symbol table.
> deviocstats = 0xbee880: value = 12511440 = 0xbee8d0 = deviocstats + 0x50
> putenv("DEVIOCSTATS=/corvette/home/epics/support/devIocStats-3-1-16")
> value = 0 = 0x0
> deviocstatsbin = "/corvette/home/epics/support/devIocStats-3-1-16/bin/vxWorks-ppc32"
> New symbol "deviocstatsbin" added to kernel symbol table.
> deviocstatsbin = 0xbee9d0: value = 12511792 = 0xbeea30 = '0' = deviocstatsbin + 0x60
> epics_base = "/corvette/usr/local/epics/base-7.0.4"
> New symbol "epics_base" added to kernel symbol table.
> epics_base = 0xbeea90: value = 12511968 = 0xbeeae0 = epics_base + 0x50
> putenv("EPICS_BASE=/corvette/usr/local/epics/base-7.0.4")
> value = 0 = 0x0
> epics_basebin = "/corvette/usr/local/epics/base-7.0.4/bin/vxWorks-ppc32"
> New symbol "epics_basebin" added to kernel symbol table.
> epics_basebin = 0xbeebc0: value = 12512288 = 0xbeec20 = ' ' = epics_basebin + 0x60
> adandor = "/corvette/home/epics/support/areaDetector-3-8/ADAndor"
> New symbol "adandor" added to kernel symbol table.
> adandor = 0xbeec70: value = 12512448 = 0xbeecc0 = adandor + 0x50
> putenv("ADANDOR=/corvette/home/epics/support/areaDetector-3-8/ADAndor")
> value = 0 = 0x0
> adroper = "/corvette/home/epics/support/areaDetector-3-8/ADRoper"
> New symbol "adroper" added to kernel symbol table.
> adroper = 0xbeedc0: value = 12512784 = 0xbeee10 = adroper + 0x50
> putenv("ADROPER=/corvette/home/epics/support/areaDetector-3-8/ADRoper")
> value = 0 = 0x0
> adlightfield = "/corvette/home/epics/support/areaDetector-3-8/ADLightField"
> New symbol "adlightfield" added to kernel symbol table.
> adlightfield = 0xbeef10: value = 12513136 = 0xbeef70 = 'p' = adlightfield + 0x60
> putenv("ADLIGHTFIELD=/corvette/home/epics/support/areaDetector-3-8/ADLightField")
> value = 0 = 0x0
> admar345 = "/corvette/home/epics/support/areaDetector-3-8/ADmar345"
> New symbol "admar345" added to kernel symbol table.
> admar345 = 0xbf0040: value = 12517520 = 0xbf0090 = admar345 + 0x50
> putenv("ADMAR345=/corvette/home/epics/support/areaDetector-3-8/ADmar345")
> value = 0 = 0x0
> admarccd = "/corvette/home/epics/support/areaDetector-3-8/ADmarCCD"
> New symbol "admarccd" added to kernel symbol table.
> admarccd = 0xbf0190: value = 12517856 = 0xbf01e0 = admarccd + 0x50
> putenv("ADMARCCD=/corvette/home/epics/support/areaDetector-3-8/ADmarCCD")
> value = 0 = 0x0
> adperkinelmer = "/corvette/home/epics/support/areaDetector-3-8/ADPerkinElmer"
> New symbol "adperkinelmer" added to kernel symbol table.
> adperkinelmer = 0xbf1290: value = 12522224 = 0xbf12f0 = adperkinelmer + 0x60
> putenv("ADPERKINELMER=/corvette/home/epics/support/areaDetector-3-8/ADPerkinElmer")
> value = 0 = 0x0
> adpilatus = "/corvette/home/epics/support/areaDetector-3-8/ADPilatus"
> New symbol "adpilatus" added to kernel symbol table.
> adpilatus = 0xbf1410: value = 12522592 = 0xbf1460 = '`' = adpilatus + 0x50
> putenv("ADPILATUS=/corvette/home/epics/support/areaDetector-3-8/ADPilatus")
> value = 0 = 0x0
> adprosilica = "/corvette/home/epics/support/areaDetector-3-8/ADProsilica"
> New symbol "adprosilica" added to kernel symbol table.
> adprosilica = 0xbf1570: value = 12011088 = 0xb74650 = 'P'
> putenv("ADPROSILICA=/corvette/home/epics/support/areaDetector-3-8/ADProsilica")
> value = 0 = 0x0
> adpointgrey = "/corvette/home/epics/support/areaDetector-3-8/ADPointGrey"
> New symbol "adpointgrey" added to kernel symbol table.
> adpointgrey = 0xbf17e0: value = 12523568 = 0xbf1830 = '0' = adpointgrey + 0x50
> putenv("ADPOINTGREY=/corvette/home/epics/support/areaDetector-3-8/ADPointGrey")
> value = 0 = 0x0
> adeiger = "/corvette/home/epics/support/areaDetector-3-8/ADEiger"
> New symbol "adeiger" added to kernel symbol table.
> adeiger = 0xbf1950: value = 12523936 = 0xbf19a0 = adeiger + 0x50
> putenv("ADEIGER=/corvette/home/epics/support/areaDetector-3-8/ADEiger")
> value = 0 = 0x0
> adgenicam = "/corvette/home/epics/support/areaDetector-3-8/ADGenICam"
> New symbol "adgenicam" added to kernel symbol table.
> adgenicam = 0xbf1aa0: value = 12524272 = 0xbf1af0 = adgenicam + 0x50
> putenv("ADGENICAM=/corvette/home/epics/support/areaDetector-3-8/ADGenICam")
> value = 0 = 0x0
> adspinnaker = "/corvette/home/epics/support/areaDetector-3-8/ADSpinnaker"
> New symbol "adspinnaker" added to kernel symbol table.
> adspinnaker = 0xbf1c00: value = 12524624 = 0xbf1c50 = 'P' = adspinnaker + 0x50
> putenv("ADSPINNAKER=/corvette/home/epics/support/areaDetector-3-8/ADSpinnaker")
> value = 0 = 0x0
> adaravis = "/corvette/home/epics/support/areaDetector-3-8/ADAravis"
> New symbol "adaravis" added to kernel symbol table.
> adaravis = 0xbf1d70: value = 12524992 = 0xbf1dc0 = adaravis + 0x50
> putenv("ADARAVIS=/corvette/home/epics/support/areaDetector-3-8/ADAravis")
> value = 0 = 0x0
> advimba = "/corvette/home/epics/support/areaDetector-3-8/ADVimba"
> New symbol "advimba" added to kernel symbol table.
> advimba = 0xbf1ec0: value = 12525328 = 0xbf1f10 = advimba + 0x50
> putenv("ADVIMBA=/corvette/home/epics/support/areaDetector-3-8/ADVimba")
> value = 0 = 0x0
> cars = "/corvette/home/epics/support/CARS"
> New symbol "cars" added to kernel symbol table.
> cars = 0xbf1ff0: value = 12525632 = 0xbf2040 = '@' = cars + 0x50
> putenv("CARS=/corvette/home/epics/support/CARS")
> value = 0 = 0x0
> carsbin = "/corvette/home/epics/support/CARS/bin/vxWorks-ppc32"
> New symbol "carsbin" added to kernel symbol table.
> carsbin = 0xbf2130: value = 12525952 = 0xbf2180 = carsbin + 0x50
> cryoconm32 = "/corvette/home/epics/support/CryoconM32"
> New symbol "cryoconm32" added to kernel symbol table.
> cryoconm32 = 0xbf21d0: value = 12526112 = 0xbf2220 = ' ' = cryoconm32 + 0x50
> putenv("CRYOCONM32=/corvette/home/epics/support/CryoconM32")
> value = 0 = 0x0
> dac128v = "/corvette/home/epics/support/dac128V-2-9"
> New symbol "dac128v" added to kernel symbol table.
> dac128v = 0xb78580: value = 12027344 = 0xb785d0 = dac128v + 0x50
> putenv("DAC128V=/corvette/home/epics/support/dac128V-2-9")
> value = 0 = 0x0
> dante = "/corvette/home/epics/support/dante-1-0"
> New symbol "dante" added to kernel symbol table.
> dante = 0xb786b0: value = 12027648 = 0xb78700 = dante + 0x50
> putenv("DANTE=/corvette/home/epics/support/dante-1-0")
> value = 0 = 0x0
> delaygen = "/corvette/home/epics/support/delaygen-1-2-1"
> New symbol "delaygen" added to kernel symbol table.
> delaygen = 0xb787d0: value = 12027936 = 0xb78820 = ' ' = delaygen + 0x50
> putenv("DELAYGEN=/corvette/home/epics/support/delaygen-1-2-1")
> value = 0 = 0x0
> ip = "/corvette/home/epics/support/ip-2-20-1"
> New symbol "ip" added to kernel symbol table.
> ip = 0xb78910: value = 12528368 = 0xbf2af0 = cryoconm32 + 0x920
> putenv("IP=/corvette/home/epics/support/ip-2-20-1")
> value = 0 = 0x0
> ipac = "/corvette/home/epics/support/ipac-2-15"
> New symbol "ipac" added to kernel symbol table.
> ipac = 0xbf2bc0: value = 12528656 = 0xbf2c10 = ipac + 0x50
> putenv("IPAC=/corvette/home/epics/support/ipac-2-15")
> value = 0 = 0x0
> ip330 = "/corvette/home/epics/support/ip330-2-9"
> New symbol "ip330" added to kernel symbol table.
> ip330 = 0xbf2ce0: value = 12528944 = 0xbf2d30 = '0' = ip330 + 0x50
> putenv("IP330=/corvette/home/epics/support/ip330-2-9")
> value = 0 = 0x0
> ipunidig = "/corvette/home/epics/support/ipUnidig-2-11"
> New symbol "ipunidig" added to kernel symbol table.
> ipunidig = 0xbf2e00: value = 12529232 = 0xbf2e50 = 'P' = ipunidig + 0x50
> putenv("IPUNIDIG=/corvette/home/epics/support/ipUnidig-2-11")
> value = 0 = 0x0
> mca = "/corvette/home/epics/support/mca-7-8"
> New symbol "mca" added to kernel symbol table.
> mca = 0xbf2f40: value = 12529552 = 0xbf2f90 = mca + 0x50
> putenv("MCA=/corvette/home/epics/support/mca-7-8")
> value = 0 = 0x0
> mcabin = "/corvette/home/epics/support/mca-7-8/bin/vxWorks-ppc32"
> New symbol "mcabin" added to kernel symbol table.
> mcabin = 0xbf3070: value = 12529856 = 0xbf30c0 = mcabin + 0x50
> meascomp = "/corvette/home/epics/support/measComp-2-5"
> New symbol "meascomp" added to kernel symbol table.
> meascomp = 0xbf3110: value = 12530016 = 0xbf3160 = '`' = meascomp + 0x50
> putenv("MEASCOMP=/corvette/home/epics/support/measComp-2-5")
> value = 0 = 0x0
> modbus = "/corvette/home/epics/support/modbus-3-0"
> New symbol "modbus" added to kernel symbol table.
> modbus = 0xbf3240: value = 12042864 = 0xb7c270 = 'p'
> putenv("MODBUS=/corvette/home/epics/support/modbus-3-0")
> value = 0 = 0x0
> modbusbin = "/corvette/home/epics/support/modbus-3-0/bin/vxWorks-ppc32"
> New symbol "modbusbin" added to kernel symbol table.
> modbusbin = 0xb7c2b0: value = 12054416 = 0xb7ef90
> motor = "/corvette/home/epics/support/motor-7-0"
> New symbol "motor" added to kernel symbol table.
> motor = 0xbb64c0: value = 12054544 = 0xb7f010
> putenv("MOTOR=/corvette/home/epics/support/motor-7-0")
> value = 0 = 0x0
> motorbin = "/corvette/home/epics/support/motor-7-0/bin/vxWorks-ppc32"
> New symbol "motorbin" added to kernel symbol table.
> motorbin = 0xb7f050: value = 12055136 = 0xb7f260 = '`' = motorbin + 0x210
> optics = "/corvette/home/epics/support/optics-2-13-3"
> New symbol "optics" added to kernel symbol table.
> optics = 0xb7f2b0: value = 12055296 = 0xb7f300 = optics + 0x50
> putenv("OPTICS=/corvette/home/epics/support/optics-2-13-3")
> value = 0 = 0x0
> quadem = "/corvette/home/epics/support/quadEM-9-2-1"
> New symbol "quadem" added to kernel symbol table.
> quadem = 0xb7f3e0: value = 12055600 = 0xb7f430 = '0' = quadem + 0x50
> putenv("QUADEM=/corvette/home/epics/support/quadEM-9-2-1")
> value = 0 = 0x0
> quadembin = "/corvette/home/epics/support/quadEM-9-2-1/bin/vxWorks-ppc32"
> New symbol "quadembin" added to kernel symbol table.
> quadembin = 0xb7f520: value = 12055920 = 0xb7f570 = 'p' = quadembin + 0x50
> softglue = "/corvette/home/epics/support/softGlue-2-8-2"
> New symbol "softglue" added to kernel symbol table.
> softglue = 0xb7f5c0: value = 12056080 = 0xb7f610 = softglue + 0x50
> putenv("SOFTGLUE=/corvette/home/epics/support/softGlue-2-8-2")
> value = 0 = 0x0
> std = "/corvette/home/epics/support/std-3-6-1"
> New symbol "std" added to kernel symbol table.
> std = 0xb7f6f0: value = 12056384 = 0xb7f740 = '@' = std + 0x50
> putenv("STD=/corvette/home/epics/support/std-3-6-1")
> value = 0 = 0x0
> stdbin = "/corvette/home/epics/support/std-3-6-1/bin/vxWorks-ppc32"
> New symbol "stdbin" added to kernel symbol table.
> stdbin = 0xb7f820: value = 12056688 = 0xb7f870 = 'p' = stdbin + 0x50
> stream = "/corvette/home/epics/support/stream-2-8-9"
> New symbol "stream" added to kernel symbol table.
> stream = 0xb7f8c0: value = 12056848 = 0xb7f910 = stream + 0x50
> putenv("STREAM=/corvette/home/epics/support/stream-2-8-9")
> value = 0 = 0x0
> tomoscan = "/corvette/home/epics/support/tomoscan"
> New symbol "tomoscan" added to kernel symbol table.
> tomoscan = 0xb7f9f0: value = 12057152 = 0xb7fa40 = '@' = tomoscan + 0x50
> putenv("TOMOSCAN=/corvette/home/epics/support/tomoscan")
> value = 0 = 0x0
> tomoscanbin = "/corvette/home/epics/support/tomoscan/bin/vxWorks-ppc32"
> New symbol "tomoscanbin" added to kernel symbol table.
> tomoscanbin = 0xb7fb20: value = 12057456 = 0xb7fb70 = 'p' = tomoscanbin + 0x50
> tpmac = "/corvette/home/epics/support/tpmac-3-11dls5"
> New symbol "tpmac" added to kernel symbol table.
> tpmac = 0xb7fbc0: value = 12057616 = 0xb7fc10 = tpmac + 0x50
> putenv("TPMAC=/corvette/home/epics/support/tpmac-3-11dls5")
> value = 0 = 0x0
> tpmacbin = "/corvette/home/epics/support/tpmac-3-11dls5/bin/vxWorks-ppc32"
> New symbol "tpmacbin" added to kernel symbol table.
> tpmacbin = 0xb7fd00: value = 12057936 = 0xb7fd50 = 'P' = tpmacbin + 0x50
> vac = "/corvette/home/epics/support/vac-1-9"
> New symbol "vac" added to kernel symbol table.
> vac = 0xb7fda0: value = 12058096 = 0xb7fdf0 = vac + 0x50
> putenv("VAC=/corvette/home/epics/support/vac-1-9")
> value = 0 = 0x0
> vacbin = "/corvette/home/epics/support/vac-1-9/bin/vxWorks-ppc32"
> New symbol "vacbin" added to kernel symbol table.
> vacbin = 0xb7fed0: value = 12058400 = 0xb7ff20 = ' ' = vacbin + 0x50
> vme = "/corvette/home/epics/support/vme-2-9-2"
> New symbol "vme" added to kernel symbol table.
> vme = 0xb7ff70: value = 12058560 = 0xb7ffc0 = vme + 0x50
> putenv("VME=/corvette/home/epics/support/vme-2-9-2")
> value = 0 = 0x0
> < ../nfsCommandsGSE
> # Set the default gateway
> routec "-n add default 164.54.160.1"
> add net 0.0.0.0: netmask 0.0.0.0: gateway 164.54.160.1
> value = 0 = 0x0
>
> # The following line eliminates "cksum: out of data" messages due to DHCP
> #proxyPortFwdOff(67)
>
> # Set the UNIX uid/gid to the EPICS account
> ## nfsAuthUnixSet("corvette",401,400,0,0)
> ## nfsAuthUnixSet("ion",1001,400,0,0)
> ## nfsAuthUnixSet("ion", 849601092, 400, 0, 0)
> ##
>
> nfsAuthUnixSet("corvette", 849601092, 849600513, 0, 0)
> value = 0 = 0x0
>
> # Mount drives with NFS
> nfsMount("corvette","/home","/corvette/home")
> value = 0 = 0x0
> nfsMount("corvette","/home","/home")
> value = 0 = 0x0
>
> # Define locations for logging and for APS EPICS process variables
> # No longer need 164.54.188.50 since a local PV gateway
> # provides APS variables, MLR 5/31/00
> putenv("EPICS_IOC_LOG_INET=164.54.160.82")
> value = 0 = 0x0
> # Set size large enough for double waveforms N=11000
> putenv("EPICS_CA_MAX_ARRAY_BYTES=88000")
> value = 0 = 0x0
>
> cd topbin
> value = 0 = 0x0
> load("CARSApp.munch")
> Unexpected problem with CA circuit to server "ioc13idc.cars.aps.anl.gov:5064" was "Connection reset by peer" - disconnecting
>
> Wed Jun 03 18:18:34 CDT 2020
> medmCAExceptionHandlerCb: Channel Access Exception:
> Channel Name: Unavailable
> Native Type: Unavailable
> Native Count: 0
> Access: Unavailable
> Host: Unavailable
> Message: Virtual circuit disconnect
> Context: ioc13idc.cars.aps.anl.gov:5064
> Requested Type: TYPENOTCONN
> Requested Count: 0
> Source File: ../cac.cpp
> Line number: 1223
> osdMonotonicInit: Measuring CPU time-base frequency ... 16666123 ticks/sec.
> value = 12513744 = 0xbef1d0 = adlightfield + 0x2c0
>
> # Increase size of errlog buffer
> errlogInit(20000)
> value = 0 = 0x0
>
> # Tell EPICS all about the record types, device-support modules, drivers,
> # etc. in this build.
> dbLoadDatabase("$(CARS)/dbd/CARSVX.dbd")
> value = 0 = 0x0
> CARSVX_registerRecordDeviceDriver(pdbbase)
> value = 0 = 0x0
>
> cd startup
> value = 0 = 0x0
> < industryPack.cmd
> # The first carrier in our system is a TEWS TVME200
> # The argument to ipacAddTVME200 is the values of the 6 switches on the board
> # In thise case 30 = base address 3000
> # 2 = interrupt mapping 4, 5, 2, 1, 4, 5, 2, 1
> # F = A32 address space, 8MB per slot
> # A0 = A0000000 base address in A32 space
> ipacAddTVME200("302FA0")
> value = 0 = 0x0
> #ipacAddVIPC616_01("0x3000,0xa0000000")
> ipacAddVIPC616_01("0x3400,0xa2000000")
> value = 0 = 0x0
>
> # Initialize Octal UART stuff
> tyGSOctalDrv 2
> value = 0 = 0x0
> tyGSOctalModuleInit("UART0", "232", 0x80, 0, 0)
> value = 0 = 0x0
> tyGSOctalModuleInit("UART1", "232", 0x81, 0, 1)
> value = 1 = 0x1
>
> # Initialize Acromag IP-330 ADC
> # Ip330 *initIp330(
> # const char *portName, int carrier, int slot,
> # const char *typeString, const char *rangeString,
> # int firstChan, int lastChan,
> # int intVec)
> # portName = name to give this asyn port
> # carrier = IPAC carrier number (0, 1, etc.)
> # slot = IPAC slot (0,1,2,3, etc.)
> # typeString = "D" or "S" for differential or single-ended
> # rangeString = "-5to5","-10to10","0to5", or "0to10"
> # This value must match hardware setting selected
> # firstChan = first channel to be digitized. This must be in the range:
> # 0 to 31 (single-ended)
> # 0 to 15 (differential)
> # lastChan = last channel to be digitized
> # intVec Interrupt vector
> initIp330("Ip330_1",0,2,"D","-5to5",0,15,120)
> value = 0 = 0x0
>
> # int configIp330(
> # const char *portName,
> # int scanMode, const char *triggerString,
> # int microSecondsPerScan, int secondsBetweenCalibrate)
> # portName = name of aysn port created with initIp330
> # scanMode = scan mode:
> # 0 = disable
> # 1 = uniformContinuous
> # 2 = uniformSingle
> # 3 = burstContinuous (normally recommended)
> # 4 = burstSingle
> # 5 = convertOnExternalTriggerOnly
> # triggerString = "Input" or "Output". Selects the direction of the external
> # trigger signal.
> # microSecondsPerScan = repeat interval to digitize all channels
> # The minimum theoretical time is 15 microseconds times the
> # number of channels, but a practical limit is probably 100
> # microseconds.
> # secondsBetweenCalibrate = number of seconds between calibration cycles.
> # If zero then there will be no periodic calibration, but
> # one calibration will still be done at initialization.
> configIp330("Ip330_1", 3,"Input",1000,0)
> value = 0 = 0x0
>
> # int initFastSweep(char *portName, char *inputName,
> # int maxSignals, int maxPoints)
> # portName = asyn port name for this port
> # inputName = name of input port
> # maxSignals = maximum number of input signals.
> # maxPoints = maximum number of points in a sweep. The amount of memory
> # allocated will be maxPoints*maxSignals*4 bytes
> initFastSweep("Ip330Sweep1","Ip330_1",6,2048)
> value = 0 = 0x0
> dbLoadTemplate("Ip330_ADC.template")
> value = 0 = 0x0
>
> #Initialize Greenspring IP-Unidig
> # initIpUnidig(char *portName,
> # int carrier,
> # int slot,
> # int msecPoll,
> # int intVec,
> # int risingMask,
> # int fallingMask,
> # int biMask,
> # int maxClients)
> # portName = name to give this asyn port
> # carrier = IPAC carrier number (0, 1, etc.)
> # slot = IPAC slot (0,1,2,3, etc.)
> # msecPoll = polling time for input bits in msec.
> # intVec = interrupt vector
> # risingMask = mask of bits to generate interrupts on low to high (24 bits)
> # fallingMask = mask of bits to generate interrupts on high to low (24 bits)
> initIpUnidig("Unidig1", 0, 3, 100, 116, 0xffffff, 0xffffff)
> value = 0 = 0x0
> initIpUnidig("Unidig2", 1, 1, 100, 117, 0xffffff, 0xffffff)
> value = 0 = 0x0
> initIpUnidig("Unidig3", 1, 2, 100, 118, 0xffffff, 0xffffff)
> value = 0 = 0x0
>
> dbLoadTemplate("ipUnidig.substitutions")
> value = 0 = 0x0
> dbLoadTemplate("filter.substitutions")
> value = 0 = 0x0
>
>
> # DAC in first slot on second board
> # Initialize Systran DAC
> # initDAC128V(char *portName, int carrier, int slot)
> # portName = name to give this asyn port
> # carrier = IPAC carrier number (0, 1, etc.)
> # slot = IPAC slot (0,1,2,3, etc.)
> initDAC128V("DAC1", 1, 0)
> value = 0 = 0x0
> dbLoadTemplate("DAC.template")
> value = 0 = 0x0
>
> < serial.cmd
> # tyGSAsynInit(char *port, char *moduleName, int channel, int baud,
> # char parity, int sbits, int dbits, char handshake,
> # char *inputEos, char *outputEos)
> tyGSAsynInit("serial1", "UART0", 0, 9600,'N',2,8,'N',"\r","\r") /* SRS570 */
> value = 0 = 0x0
> tyGSAsynInit("serial2", "UART0", 1, 9600,'N',2,8,'N',"\r","\r") /* SRS570 */
> value = 0 = 0x0
> tyGSAsynInit("serial3", "UART0", 2, 9600,'N',2,8,'N',"\r","\r") /* SRS570 */
> value = 0 = 0x0
> tyGSAsynInit("serial4", "UART0", 3, 9600,'N',2,8,'N',"\r","\r") /* SRS570 */
> value = 0 = 0x0
> tyGSAsynInit("serial5", "UART0", 4, 19200,'N',1,8,'N',"\r","\r") /* SRS570 */
> value = 0 = 0x0
> tyGSAsynInit("serial6", "UART0", 5, 19200,'N',1,8,'N',"\r\n","\n") /* Keithley 2000 */
> value = 0 = 0x0
> tyGSAsynInit("serial7", "UART0", 6, 9600,'N',2,8,'N',"\r","\r") /* Pelco CM6700 */
> value = 0 = 0x0
> tyGSAsynInit("serial8", "UART0", 7, 19200,'N',1,8,'N',"\r\n","\n") /* Keithley 2000 */
> value = 0 = 0x0
> tyGSAsynInit("serial9", "UART1", 0, 9600,'N',2,8,'N',"\r","\r") /* SRS570 */
> value = 0 = 0x0
> tyGSAsynInit("serial10","UART1", 1, 9600,'N',2,8,'N',"\r","\r") /* SRS570 */
> value = 0 = 0x0
> tyGSAsynInit("serial11","UART1", 2, 9600,'N',2,8,'N',"\r","\r") /* SRS570 */
> value = 0 = 0x0
> tyGSAsynInit("serial12","UART1", 3, 9600,'N',2,8,'N',"\r","\r") /* SRS570 */
> value = 0 = 0x0
> tyGSAsynInit("serial13","UART1", 4, 9600,'N',1,8,'N',"\r","\r") /* Unused */
> value = 0 = 0x0
> tyGSAsynInit("serial14","UART1", 5, 9600,'N',1,8,'N',"\r","\r") /* Unused */
> value = 0 = 0x0
> tyGSAsynInit("serial15","UART1", 6, 9600,'N',2,8,'N',"\r","\r") /* Unused */
> value = 0 = 0x0
> tyGSAsynInit("serial16","UART1", 7, 9600,'N',1,8,'N',"\r","\r") /* Unused */
> value = 0 = 0x0
>
> # Load asyn records on all serial ports
> dbLoadTemplate("asynRecord.template")
> value = 0 = 0x0
>
> # First Octal UART for microprobe experiments
> dbLoadRecords("$(IP)/db/SR570.db", "P=13IDC:,A=A1,PORT=serial1")
> value = 0 = 0x0
> dbLoadRecords("$(IP)/db/SR570.db", "P=13IDC:,A=A2,PORT=serial2")
> value = 0 = 0x0
> dbLoadRecords("$(IP)/db/SR570.db", "P=13IDC:,A=A3,PORT=serial3")
> value = 0 = 0x0
> dbLoadRecords("$(IP)/db/SR570.db", "P=13IDC:,A=A4,PORT=serial4")
> value = 0 = 0x0
> # dbLoadRecords("$(IP)/db/SR570.db", "P=13IDC:,A=A5,PORT=serial5")
> # dbLoadRecords("$(IP)/db/SR570.db", "P=13IDC:,A=A6,PORT=serial6")
> # Serial 7 is Pelco CM6700 video switch
> dbLoadTemplate("Pelco_CM6700.substitutions")
> value = 0 = 0x0
>
> dbLoadRecords("$(IP)/db/Keithley2kDMM_mf.db","P=13IDC:,Dmm=DMM1,PORT=serial6")
> value = 0 = 0x0
> dbLoadRecords("$(IP)/db/Keithley2kDMM_mf.db","P=13IDC:,Dmm=DMM2,PORT=serial8")
> value = 0 = 0x0
>
> # Second Octal UART for diffractometer experiments
> # Serial ports 1 thru 4 are for SR570 current amplifiers
> dbLoadRecords("$(IP)/db/SR570.db", "P=13IDC:,A=B1,PORT=serial9")
> value = 0 = 0x0
> dbLoadRecords("$(IP)/db/SR570.db", "P=13IDC:,A=B2,PORT=serial10")
> value = 0 = 0x0
> dbLoadRecords("$(IP)/db/SR570.db", "P=13IDC:,A=B3,PORT=serial11")
> value = 0 = 0x0
> dbLoadRecords("$(IP)/db/SR570.db", "P=13IDC:,A=B4,PORT=serial12")
> value = 0 = 0x0
>
>
> # Set debugging flags
> mcaRecordDebug = 0
> mcaRecordDebug = 0x20c4958: value = 0 = 0x0
> drvSTR7201Debug = 0
> New symbol "drvSTR7201Debug" added to kernel symbol table.
> drvSTR7201Debug = 0x266ece0: value = 0 = 0x0
> devSTR7201Debug = 0
> New symbol "devSTR7201Debug" added to kernel symbol table.
> devSTR7201Debug = 0x2620a50: value = 0 = 0x0
> save_restoreDebug = 0
> save_restoreDebug = 0x20c5e68: value = 0 = 0x0
> devXSC8Debug = 0
> New symbol "devXSC8Debug" added to kernel symbol table.
> devXSC8Debug = 0x226b340: value = 0 = 0x0
> drvXPSC8Debug = 0
> New symbol "drvXPSC8Debug" added to kernel symbol table.
> drvXPSC8Debug = 0x2647db0: value = 0 = 0x0
> # Asyn XPS driver debug variable 0-5
> asynXPSC8Debug = 0
> New symbol "asynXPSC8Debug" added to kernel symbol table.
> asynXPSC8Debug = 0x259ab00: value = 0 = 0x0
>
> # Load database
> # dbLoadRecords("$(STD)/db/scaler.db", "P=13IDC:,S=scaler1,OUT=#C0 S0 @,FREQ=1e7,DTYP=Joerger VSC8/16")
>
> dbLoadTemplate("motors.template")
> value = 0 = 0x0
>
> # Multichannel analyzer stuff
> # AIMConfig(portName, ethernet_address, portNumber(1 or 2), maxChans,
> # maxSignals, maxSequences, ethernetDevice)
> # This AIM moved to 13BMC. No AIM in IDC now.
> ##AIMConfig("NI6E6/1", 0x6E6, 1, 2048, 1, 1, "dc0")
> ##AIMConfig("NI6E6/2", 0x6E6, 2, 2048, 4, 1, "dc0")
> ##dbLoadRecords("$(MCA)/db/mca.db", "P=13IDC:,M=aim_adc1,DTYP=asynMCA,INP=@asyn(NI6E6/1 0),NCHAN=2048")
> ##dbLoadRecords("$(MCA)/db/mca.db", "P=13IDC:,M=aim_mcs1,DTYP=asynMCA,INP=@asyn(NI6E6/2 0),NCHAN=2048")
>
> #icbConfig(portName, module, ethernetAddress, icbAddress, moduleType)
> # portName to give to this asyn port
> # ethernetAddress - Ethernet address of module, low order 16 bits
> # icbAddress - rotary switch setting inside ICB module
> # moduleType
> # 0 = ADC
> # 1 = Amplifier
> # 2 = HVPS
> # 3 = TCA
> # 4 = DSP
> ##icbConfig("icbAdc1", 0x6e6, 5, 0)
> ##dbLoadRecords("$(MCA)/db/icb_adc.db", "P=13IDC:,ADC=adc1,PORT=icbAdc1")
> #icbConfig("icbAmp1", 0x6e6, 3, 1)
> #dbLoadRecords"$(MCA)/db/icb_amp.db", "P=13IDC:,AMP=amp1,PORT=icbAmp1")
> #icbConfig("icbHvps1", 0x6e6, 2, 2)
> #dbLoadRecords("$(MCA)/db/icb_hvps.db", "P=13IDC:,HVPS=hvps1,PORT=icbHvps1,LIMIT=1000")
>
> # SIS3820 MCS
> ##<SIS3820_8.cmd
>
> # SIS3801 MCS
> iocsh "SIS3801_8.cmd"
> # Example vxWorks iocsh startup file for SIS3801
> epicsEnvSet("PREFIX", "13IDC:SIS1:")
> epicsEnvSet("RNAME", "mca")
> epicsEnvSet("MAX_SIGNALS", "8")
> epicsEnvSet("MAX_CHANS", "10100")
> epicsEnvSet("PORT", "SIS3801/1")
> # For MCA records FIELD=READ, for waveform records FIELD=PROC
> epicsEnvSet("FIELD", "READ")
> #drvSIS3801Config("Port name",
> # baseAddress,
> # interruptVector,
> # int interruptLevel,
> # channels,
> # signals)
> drvSIS3801Config(SIS3801/1, 0x90000000, 220, 6, 10100, 8)
> # This loads the scaler record and supporting records
> dbLoadRecords("/corvette/home/epics/support/std-3-6-1/db/scaler32.db", "P=13IDC:, S=scaler1, DTYP=Asyn Scaler, OUT=@asyn(SIS3801/1), FREQ=25000000")
> # This database provides the support for the MCS functions
> dbLoadRecords("/corvette/home/epics/support/mca-7-8/db/SIS38XX.template", "P=13IDC:SIS1:, PORT=SIS3801/1, SCALER=13IDC:SIS1:scaler1")
> # Load either MCA or waveform records below
> # The number of records loaded must be the same as MAX_SIGNALS defined above
> # Load the MCA records
> dbLoadRecords("/corvette/home/epics/support/mca-7-8/db/simple_mca.db", "P=13IDC:SIS1:, M=mca1, DTYP=asynMCA, INP=@asyn(SIS3801/1 0), PREC=3, CHANS=10100")
> dbLoadRecords("/corvette/home/epics/support/mca-7-8/db/simple_mca.db", "P=13IDC:SIS1:, M=mca2, DTYP=asynMCA, INP=@asyn(SIS3801/1 1), PREC=3, CHANS=10100")
> dbLoadRecords("/corvette/home/epics/support/mca-7-8/db/simple_mca.db", "P=13IDC:SIS1:, M=mca3, DTYP=asynMCA, INP=@asyn(SIS3801/1 2), PREC=3, CHANS=10100")
> dbLoadRecords("/corvette/home/epics/support/mca-7-8/db/simple_mca.db", "P=13IDC:SIS1:, M=mca4, DTYP=asynMCA, INP=@asyn(SIS3801/1 3), PREC=3, CHANS=10100")
> dbLoadRecords("/corvette/home/epics/support/mca-7-8/db/simple_mca.db", "P=13IDC:SIS1:, M=mca5, DTYP=asynMCA, INP=@asyn(SIS3801/1 4), PREC=3, CHANS=10100")
> dbLoadRecords("/corvette/home/epics/support/mca-7-8/db/simple_mca.db", "P=13IDC:SIS1:, M=mca6, DTYP=asynMCA, INP=@asyn(SIS3801/1 5), PREC=3, CHANS=10100")
> dbLoadRecords("/corvette/home/epics/support/mca-7-8/db/simple_mca.db", "P=13IDC:SIS1:, M=mca7, DTYP=asynMCA, INP=@asyn(SIS3801/1 6), PREC=3, CHANS=10100")
> dbLoadRecords("/corvette/home/epics/support/mca-7-8/db/simple_mca.db", "P=13IDC:SIS1:, M=mca8, DTYP=asynMCA, INP=@asyn(SIS3801/1 7), PREC=3, CHANS=10100")
> asynSetTraceIOMask(SIS3801/1,0,2)
> #asynSetTraceMask("$(PORT)",0,0xff)
> # Exit iocsh
> exit
> value = 0 = 0x0
>
> ### Allstop, alldone
> dbLoadRecords("$(MOTOR)/db/motorUtil.db","P=13IDC:")
> value = 0 = 0x0
>
> ### Scan-support software
> # crate-resident scan. This executes 1D, 2D, 3D, and 4D scans, and caches
> # 1D data, but it doesn't store anything to disk. (You need the data catcher
> # or the equivalent for that.) This database is configured to use the
> # "alldone" database (above) to figure out when motors have stopped moving
> # and it's time to trigger detectors.
>
> dbLoadRecords("$(SSCAN)/db/scan.db","P=13IDC:,MAXPTS1=2000,MAXPTS2=500,MAXPTS3=20,MAXPTS4=5,MAXPTSH=10")
> value = 0 = 0x0
>
> # A set of scan parameters for each positioner. This is a convenience
> # for the user. It can contain an entry for each scannable thing in the
> # crate.
> dbLoadTemplate("scanParms.template")
> value = 0 = 0x0
>
> dbLoadRecords("$(MCA)/db/mca.db", "P=13IDC:,M=mip330_1,DTYP=asynMCA,NCHAN=2048,INP=@asyn(Ip330Sweep1 0)")
> value = 0 = 0x0
> dbLoadRecords("$(MCA)/db/mca.db", "P=13IDC:,M=mip330_2,DTYP=asynMCA,NCHAN=2048,INP=@asyn(Ip330Sweep1 1)")
> value = 0 = 0x0
> dbLoadRecords("$(MCA)/db/mca.db", "P=13IDC:,M=mip330_3,DTYP=asynMCA,NCHAN=2048,INP=@asyn(Ip330Sweep1 2)")
> value = 0 = 0x0
> dbLoadRecords("$(MCA)/db/mca.db", "P=13IDC:,M=mip330_4,DTYP=asynMCA,NCHAN=2048,INP=@asyn(Ip330Sweep1 3)")
> value = 0 = 0x0
> # added 2-05 for split ion chmaber
> dbLoadRecords("$(MCA)/db/mca.db", "P=13IDC:,M=mip330_5,DTYP=asynMCA,NCHAN=2048,INP=@asyn(Ip330Sweep1 4)")
> value = 0 = 0x0
> dbLoadRecords("$(MCA)/db/mca.db", "P=13IDC:,M=mip330_6,DTYP=asynMCA,NCHAN=2048,INP=@asyn(Ip330Sweep1 5)")
> value = 0 = 0x0
>
> # Miscellaneous PV's
> dbLoadRecords("$(STD)/db/misc.db","P=13IDC:")
> value = 0 = 0x0
>
> # User calc stuff
> epicsEnvSet("PREFIX", "13IDC:")
> value = 0 = 0x0
> iocsh("../calc_GSECARS.iocsh")
> ### Stuff for user programming ###
> dbLoadRecords("/corvette/home/epics/support/calc-3-7-3/db/userCalcGlobalEnable.db","P=13IDC:")
> dbLoadRecords("/corvette/home/epics/support/calc-3-7-3/db/userCalcs10.db","P=13IDC:")
> #appendToFile("$(BUILT_SETTINGS)", '$(P)userCalcEnable')
> #dbLoadRecords("$(CALC)/db/userCalcs10more.db","P=$(PREFIX),N1=11,N2=12,N3=13,N4=14,N5=15,N6=16,N7=17,N8=18,N9=19,N10=20")
> dbLoadRecords("/corvette/home/epics/support/calc-3-7-3/db/userCalcOuts10.db","P=13IDC:")
> #appendToFile("$(BUILT_SETTINGS)", '$(P)userCalcOutEnable')
> #dbLoadRecords("$(CALC)/db/userCalcOuts10more.db","P=$(PREFIX),N1=11,N2=12,N3=13,N4=14,N5=15,N6=16,N7=17,N8=18,N9=19,N10=20")
> dbLoadRecords("/corvette/home/epics/support/calc-3-7-3/db/userStringCalcs10.db","P=13IDC:")
> #appendToFile("$(BUILT_SETTINGS)", '$(P)userStringCalcEnable')
> #dbLoadRecords("$(CALC)/db/userStringCalcs10more.db","P=$(PREFIX),N1=11,N2=12,N3=13,N4=14,N5=15,N6=16,N7=17,N8=18,N9=19,N10=20")
> dbLoadRecords("/corvette/home/epics/support/calc-3-7-3/db/userArrayCalcs10.db","P=13IDC:,N=2048")
> #appendToFile("$(BUILT_SETTINGS)", '$(P)userArrayCalcEnable')
> #dbLoadRecords("$(CALC)/db/userArrayCalcs10more.db","P=$(PREFIX),N=30000,N1=11,N2=12,N3=13,N4=14,N5=15,N6=16,N7=17,N8=18,N9=19,N10=20")
> dbLoadRecords("/corvette/home/epics/support/calc-3-7-3/db/userTransforms10.db","P=13IDC:")
> #appendToFile("$(BUILT_SETTINGS)", '$(P)userTranEnable')
> #dbLoadRecords("$(CALC)/db/userTransforms10more.db","P=$(PREFIX),N1=11,N2=12,N3=13,N4=14,N5=15,N6=16,N7=17,N8=18,N9=19,N10=20")
> dbLoadRecords("/corvette/home/epics/support/calc-3-7-3/db/userAve10.db","P=13IDC:")
> #appendToFile("$(BUILT_SETTINGS)", '$(P)userAveEnable')
> #dbLoadRecords("$(CALC)/db/userAve10more.db","P=$(PREFIX),N1=11,N2=12,N3=13,N4=14,N5=15,N6=16,N7=17,N8=18,N9=19,N10=20")
> # string sequence (sseq) records
> dbLoadRecords("/corvette/home/epics/support/calc-3-7-3/db/userStringSeqs10.db","P=13IDC:")
> #appendToFile("$(BUILT_SETTINGS)", '$(P)userStringSeqEnable')
> #dbLoadRecords("$(CALC)/db/userStringSeqs10more.db","P=$(PREFIX),N1=11,N2=12,N3=13,N4=14,N5=15,N6=16,N7=17,N8=18,N9=19,N10=20")
> # editSseq - edit any sseq or seq record
> dbLoadRecords("/corvette/home/epics/support/calc-3-7-3/db/editSseq.db", "P=13IDC:,Q=ES:")
> doAfterIocInit("seq &editSseq, 'P=13IDC:,Q=ES:'")
> # interpolation
> #dbLoadRecords("$(CALC)/db/interp.db", "P=$(PREFIX),N=2000")
> dbLoadRecords("/corvette/home/epics/support/calc-3-7-3/db/interpNew.db", "P=13IDC:,Q=1,N=2000")
> # pvHistory (in-crate archive of up to three PV's)
> dbLoadRecords("/corvette/home/epics/support/std-3-6-1/db/pvHistory.db","P=13IDC:,N=1,MAXSAMPLES=1440")
> # busy record
> dbLoadRecords("/corvette/home/epics/support/busy-1-7-2/db/busyRecord.db", "P=13IDC:,R=mybusy")
> dbLoadRecords("/corvette/home/epics/support/busy-1-7-2/db/busyRecord.db", "P=13IDC:,R=mybusy2")
> # Soft function generator
> #dbLoadRecords("$(CALC)/db/FuncGen.db","P=$(PREFIX),Q=fgen,OUT=$(PREFIX)m7.VAL")
> value = 0 = 0x0
>
> # Experiment description
> dbLoadRecords("$(CARS)/db/experiment_info.db","P=13IDC:")
> value = 0 = 0x0
>
> # SCA Window for Bede detector
> dbLoadRecords("$(CARS)/db/sca_window.db","P=13IDC:,SCA=BEDE,DAC1=DAC1_1,DAC2=DAC1_2,MIN=0,MAX=3")
> value = 0 = 0x0
>
> # devIocStats
> putenv("ENGINEER=Mark Rivers")
> value = 0 = 0x0
> putenv("LOCATION=13-ID-C")
> value = 0 = 0x0
> putenv("GROUP=GSECARS")
> value = 0 = 0x0
> dbLoadRecords("$(DEVIOCSTATS)/db/iocAdminVxWorks.db","IOC=13IDC:")
> value = 0 = 0x0
>
> < ../save_restore.cmd
> ### save_restore setup
> #
> # The rest this file does not require modification for standard use, but...
> # If you want save_restore to manage its own NFS mount, specify the name and
> # IP address of the file server to which save files should be written.
> # This currently is supported only on vxWorks.
> #save_restoreSet_NFSHost("oxygen", "164.54.52.4")
>
> # status-PV prefix
> #save_restoreSet_status_prefix("xxx:")
> # Debug-output level
> save_restoreSet_Debug(0)
> value = 0 = 0x0
>
> # Ok to save/restore save sets with missing values (no CA connection to PV)?
> save_restoreSet_IncompleteSetsOk(1)
> value = 1 = 0x1
> # Save dated backup files?
> save_restoreSet_DatedBackupFiles(1)
> value = 1 = 0x1
>
> # Number of sequenced backup files to write
> save_restoreSet_NumSeqFiles(3)
> value = 3 = 0x3
> # Time interval between sequenced backups
> save_restoreSet_SeqPeriodInSeconds(300)
> value = 300 = 0x12c = ','
>
> # specify where save files should be
> set_savefile_path(startup, "autosave")
> value = 0 = 0x0
>
> ###
> # specify what save files should be restored. Note these files must be
> # in the directory specified in set_savefile_path(), or, if that function
> # has not been called, from the directory current when iocInit is invoked
> set_pass0_restoreFile("auto_positions.sav")
> value = 0 = 0x0
> set_pass0_restoreFile("auto_settings.sav")
> value = 0 = 0x0
> set_pass1_restoreFile("auto_settings.sav")
> value = 0 = 0x0
>
> # load general-purpose interpolation tables with local, user-editable file
> # (if interp_settings.req is included in auto_settings.req, the next line
> # will overwrite those restored values)
> #set_pass1_restoreFile("interp.sav")
>
> ###
> # specify directories in which to to search for included request files
> set_requestfile_path("./")
> value = 0 = 0x0
> set_requestfile_path(cars, "CARSApp/Db")
> value = 0 = 0x0
> set_requestfile_path(adcore, "ADApp/Db")
> value = 0 = 0x0
> set_requestfile_path(autosave, "asApp/Db")
> value = 0 = 0x0
> set_requestfile_path(calc, "calcApp/Db")
> value = 0 = 0x0
> set_requestfile_path(dac128v, "dac128VApp/Db")
> value = 0 = 0x0
> set_requestfile_path(ip, "ipApp/Db")
> value = 0 = 0x0
> set_requestfile_path(mca, "mcaApp/Db")
> value = 0 = 0x0
> set_requestfile_path(motor, "motorApp/Db")
> value = 0 = 0x0
> set_requestfile_path(optics, "opticsApp/Db")
> value = 0 = 0x0
> set_requestfile_path(quadem, "quadEMApp/Db")
> value = 0 = 0x0
> set_requestfile_path(softglue, "softGlueApp/Db")
> value = 0 = 0x0
> set_requestfile_path(sscan, "sscanApp/Db")
> value = 0 = 0x0
> set_requestfile_path(softglue, "softGlueApp/Db")
> value = 0 = 0x0
> set_requestfile_path(std, "stdApp/Db")
> value = 0 = 0x0
> set_requestfile_path(vme, "vmeApp/Db")
> value = 0 = 0x0
>
> #dbLoadRecords("$(AUTOSAVE)/db/save_restoreStatus.db", "P=xxx:")
>
> # Date and time of boot
> date
> 2020/06/03 23:18:59.973453
> value = 27 = 0x1b
>
> save_restoreSet_status_prefix("13IDC:")
> value = 43389634 = 0x29612c2
> dbLoadRecords("$(AUTOSAVE)/db/save_restoreStatus.db", "P=13IDC:")
> value = 0 = 0x0
>
> # Setup device/driver support addresses, interrupt vectors, etc.
>
> ################################################################################
> # OMS VME58 driver setup parameters:
> # (1)cards, (2)base address(short, 4k boundary),
> # (3)interrupt vector (0=disable or 64 - 255), (4)interrupt level (1 - 6),
> # (5)motor task polling rate (min=1Hz,max=60Hz)
> oms58Setup(6, 0x4000, 190, 5, 10)
> value = 0 = 0x0
> ################################################################################
>
> ################################################################################
> # Joerger VSC setup parameters:
> # (1)cards, (2)base address(ext, 256-byte boundary),
> # (3)interrupt vector (0=disable or 64 - 255)
> # VSCSetup(1, 0xB0000000, 200)
> ################################################################################
>
> ################################################################################
>
> # dbrestore setup
> sr_restore_incomplete_sets_ok = 1
> New symbol "sr_restore_incomplete_sets_ok" added to kernel symbol table.
> sr_restore_incomplete_sets_ok = 0x27d8870: value = 1 = 0x1
> #reboot_restoreDebug=5
>
> iocInit
> Starting iocInit
> ############################################################################
> ## EPICS R7.0.4
> ## Rev. R7.0.4-dirty
> ############################################################################
> drvStreamInit: Warning! STREAM_PROTOCOL_PATH not set. Defaults to "."
> reboot_restore: entry for file 'auto_positions.sav'
> reboot_restore: Found filename 'auto_positions.sav' in restoreFileList.
> *** restoring from '/home/epics/support/CARS/iocBoot/ioc13idc/autosave/auto_positions.sav' at initHookState 6 (before record/device init) ***
> drvIK320 starting irq logger...
> reboot_restore: done with file 'auto_positions.sav'
>
> reboot_restore: entry for file 'auto_settings.sav'
> reboot_restore: Found filename 'auto_settings.sav' in restoreFileList.
> *** restoring from '/home/epics/support/CARS/iocBoot/ioc13idc/autosave/auto_settings.sav' at initHookState 6 (before record/device init) ***
> reboot_restore: done with file 'auto_settings.sav'
>
> Error (511,511) PV: 13IDC::TIMEZONE devStringinEnvVar (init_record) Illegal INP parm field
>
> reboot_restore: entry for file 'auto_settings.sav'
> reboot_restore: Found filename 'auto_settings.sav' in restoreFileList.
> *** restoring from '/home/epics/support/CARS/iocBoot/ioc13idc/autosave/auto_settings.sav' at initHookState 7 (after record/device init) ***
> reboot_restore: done with file 'auto_settings.sav'
>
> discoverInterfaces(): unable to fetch network interface configuration
> 2020-06-03T23:19:10.507 Failed to introspect interfaces or no network interfaces available.
> 2020-06-03T23:19:10.507 No client broadcast addresses found or specified - empty address list!
> osiSockDiscoverBroadcastAddresses(): unable to fetch network interface configuration (-1)
> Warning: RSRV has empty beacon address list
> iocRun: All initialization complete
> discoverInterfaces(): unable to fetch network interface configuration
> 0xbe8d80 (tShell0): Unhandled C++ exception resulted in call to terminate
> osiSockDiscoverBroadcastAddresses(): unable to fetch network interface configuration (-1)
> osiSockDiscoverBroadcastAddresses(): unable to fetch network interface configuration (-1)
>
>
> osiLocalAddr(): SIOCGIFCONF ioctl failed because "S_errno_ENXIO"
>
>
>
>
- Replies:
- Re: Problem booting vxWorks with base 7.0.4 Michael Davidsaver via Core-talk
- References:
- Problem booting vxWorks with base 7.0.4 Mark Rivers via Core-talk
- Re: Problem booting vxWorks with base 7.0.4 Michael Davidsaver via Core-talk
- Navigate by Date:
- Prev:
Re: Problem booting vxWorks with base 7.0.4 Michael Davidsaver via Core-talk
- Next:
Re: Problem booting vxWorks with base 7.0.4 Michael Davidsaver via Core-talk
- Index:
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
<2020>
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: Problem booting vxWorks with base 7.0.4 Michael Davidsaver via Core-talk
- Next:
Re: Problem booting vxWorks with base 7.0.4 Michael Davidsaver via Core-talk
- Index:
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
<2020>
2021
2022
2023
2024
|
·
Home
·
News
·
About
·
Base
·
Modules
·
Extensions
·
Distributions
·
Download
·