Subject: |
Problem with MVME167-02B boards |
From: |
Mark Rivers <[email protected]> |
Date: |
Wed, 24 May 1995 14:31:07 -0500 (CDT) |
Folks,
I just got two new Motorola MVEME167-02B boards. I installed the vxWorks 5.1
ROMs and tried swapping them into an IOC in place of an old MVME167. vxWorks
boots and EPICS starts, but there is one huge problem: no VME A16 devices are
visible. If I put the old MVME167 back in it works fine. With the new board
all non-VME devices work fine, but no VME A16 addresses respond.
I just spoke to John Winans and he does not understand the problem. The
MVME167-02B is supposed to be electrically identical to the old MVME-167, only
a new vmeChip-2 pinout or something.
Has anyone successfully used the MVME167-02B with EPICS? I am running
EPICS R3.12.0Beta13.
Hopefully I have just set up something wrong?
Mark
- Navigate by Date:
- Prev:
Re: More than 1 output link winans
- Next:
Re: Postscript Documentation Andrew Johnson
- Index:
1994
<1995>
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
RE: Postscript Documentation Stefan Hippler
- Next:
RE: Problem with MVME167-02B boards Mark Rivers
- Index:
1994
<1995>
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|