Subject: |
Re: More than 1 output link |
From: |
[email protected] |
Date: |
Wed, 24 May 95 13:10:25 -0500 |
>Does anyone know how to add more than 1 output link to a record?
Unless the record supports it, you will have to use something like the sequence
record. It was designed to fetch values and then put them elsewhere (It has a
group of link pairs in it.) It was also designed to allow a delay between each
transfer if you want... zero is an allowable delay.
So then, you could point each of the inputs to the same place and all the outputs
to... whereever and use a delay of zero, and get the effect you describe.
--John
- Navigate by Date:
- Prev:
Postscript Documentation Stefan Hippler
- Next:
Problem with MVME167-02B boards Mark Rivers
- Index:
1994
<1995>
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
More than 1 output link Andy Foster
- Next:
Re: More than 1 output link Steve Lewis
- Index:
1994
<1995>
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|