>One of the VME crates should provide up to 15 serial interfaces (RS-232)
>and 10-12 analog inputs. However, we were wondering which VME boards or
>modules are supported by EPICS. The List of Supported Hardware distributed
>through the ANL WWW server seems to be somewhat out of date (1993).
You might do this job with a single 162 if you choose:
2 IP-OCTAL (Green-Spring)
1 32 channel A/D from Acromag or any other ...
In case you might need additionel signals like DIN's and DOT's an D to A
you might be better off with the IRM from Fermilab which covers all the
direct I/O and you still can add two IP-OCTAL's to handle the serial lines.
Drivers for the IP-OCTAL come with the IP-module, EPICS support for these
can be obtained from us. IRM driver are also available from us.
Regards
Matthias
----------------------------------------------------------------
Matthias Clausen Deutsches Elektronen Synchrotron
Gruppe: MKV2/KRYK DESY/Hamburg, Germany
- Navigate by Date:
- Prev:
Re: error in compiling xmca Ben-chin K. Cha
- Next:
Re: Bug in command line shell caget Ben-chin K. Cha
- Index:
1994
<1995>
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: Hardware Supported by EPICS winans
- Next:
Re: Hardware Supported by EPICS Steve Lewis
- Index:
1994
<1995>
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|