We use another device to accomplish the same objectives. Its a small unit
made by Rabbit Semiconductor. We used their development kit to build a
single connection telnet server and also added a relay for remote power
cycles. The SNS guys put together a packaging design that incorporates a
powere supply, rabbit board, relay, and receptacle on a din rail. The
rabbit board sells for about $150. I don't recall the prices of the other
components. We would gladly provide our software.
Using this device we can observe VxWorks boot messages and perform a
remote power cycle of the IOC.
This is a very nice product. The development kit comes with a number of
example applications. In half a day I was talking to the board from a
telnet client and a web browser (the telnet server and http server are
different applications; I could do one or the other).
John Sinclair
[email protected]
Oak Ridge National Lab
865-576-6362 865-574-1268 (fax)
On Tue, 6 Nov 2001, Nick Rees wrote:
> All,
>
> Just because it hasn't really been mentioned in this thread, and specific
> products may be of interest, we use remote console switches for this. The
> advantage over a terminal server is that it buffers the console output so
> you can look at recent activity, without resorting to disk files. The
> price is pretty comparable.
>
> Our current favorite is the CMS series from Western Telematic
> (www.wti.com). They allow multiple telnet sessions so you can still have
> all your xterms running, if you want. However, we have found that it is
> useful to have up to date firmware. $1300 for a 16 port system.
>
> WTI also do remote power switches - the ones you telnet into and type
> 'reboot ioc1' and it very graciously interrupts the 110 volt supply from
> ioc1 for 5 seconds or so. Also useful to have. $600 for 8 separately
> switchable plugs and a total of 30 amps AC.
>
> So, maybe a crass advert for WTI, but we find them useful since driving
> two hours to the summit just to reboot an ioc is a bit boring.
>
> Cheers,
>
> --
> Nick Rees
>
> Joint Astronomy Centre Ph: +1 (808) 961-3756
> 660 N. Aohoku Place Fax: +1 (808) 961-6516
> Hilo, HI. 96720 Internet: [email protected]
- References:
- Re: Using a terminal server to catch boot messages Nick Rees
- Navigate by Date:
- Prev:
Re: Using a terminal server to catch boot messages Nick Rees
- Next:
EPICS Meeting Agenda after ICALEPCS Dec. 3&4 Bob Dalesio
- Index:
1994
1995
1996
1997
1998
1999
2000
<2001>
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: Using a terminal server to catch boot messages Nick Rees
- Next:
Re: Using a terminal server to catch boot messages Pete R. Jemian
- Index:
1994
1995
1996
1997
1998
1999
2000
<2001>
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|