RE: CA Client Diagnostic Message

["Jeff Hill" <johill@lanl.gov>]

John,

This message is generated when db_put_field() return -1. Since it does
not return any other failure status that's the full extent of the
diagnostics CA can supply.

Jeff

> -----Original Message-----
> From: john sinclair [mailto:sinclair@mail.phy.ornl.gov]
> Sent: Tuesday, January 15, 2002 3:54 PM
> To: tech talk
> Subject: CA Client Diagnostic Message
> 
> What does this mean?
> 
> CA.Client.Diagnostic..............................................
>     Message: "Could not perform a database value put for that channel"
>     Severity: "Warning" Context: "detected by: 192.168.18.57:5064 for:
> test:quad1Focus - with request chan=test:quad1Focus op=1
>                   data type=DBR_DOUBLE count=1"
> ..................................................................
> 
> Doing a put to a channel causes the above although the put succeeds.
> 
> John Sinclair
> sinclair@mail.phy.ornl.gov
> Oak Ridge National Lab
> 865-576-6362   865-574-1268 (fax)