RE: Re: Driver for Lake Shore Model 336 temperature controller

[Mark Rivers <rivers@cars.uchicago.edu>]

The synApps "ip" module has a StreamDevice database and protocol file for the Lakeshore 336.  As Eric said it should work with either GPIB or Ethernet.

This is not listed in the EPICS Hardware Modules Web page, but it should be.

Mark


-----Original Message-----
From: tech-talk-bounces@aps.anl.gov [mailto:tech-talk-bounces@aps.anl.gov] On Behalf Of Elliott Wolin
Sent: Thursday, February 09, 2012 3:29 PM
To: tech-talk@aps.anl.gov
Subject: Fwd: Re: Driver for Lake Shore Model 336 temperature controller

Hi,

Unfortunately the manual says there is no serial interface, just USB,
IEEE-488, and Ethernet.  We're interested in using Ethernet.

Thanks,



On 02/09/2012 04:24 PM, Maren Purves wrote:
>  Hi Elliott,
>
>  if it's anything like the LS 330 or LS 331 all you really needs is
>  a serial line interface/driver and a database that talks to it.
>
>  Maren
>
>  Elliott Wolin wrote:
>>  Hi,
>>
>>  Anyone know where to get a driver for a Lake Shore Model 336
>>  temperature controller?  I'm particularly interested in a Linux
>>  driver, not VxWorks.
>>
>>  Thanks,
>>

-- 

				Sincerely,
					Elliott


================================================================================


  Those raised in a morally relative or neutral environment will hold
		    no truths to be self-evident.
				

Elliott Wolin
Staff Physicist, Jefferson Lab
12000 Jefferson Ave
Suite 8 MS 12A1
Newport News, VA 23606
757-269-7365

================================================================================



-- 

				Sincerely,
					Elliott


================================================================================


  Those raised in a morally relative or neutral environment will hold
		    no truths to be self-evident.
				

Elliott Wolin
Staff Physicist, Jefferson Lab
12000 Jefferson Ave
Suite 8 MS 12A1
Newport News, VA 23606
757-269-7365

================================================================================