Re: Driver for Lake Shore Model 336 temperature controller

["Martin L. Smith" <mls@aps.anl.gov>]

I had something going at one time for the Lakeshore Model 218 using StreamDevice
over Ethernet if you think that might be a good starting point I can find it
and send to you what I have. I should have the protocol file and the database
I'm sure.

Marty

Mark Rivers wrote:
> The synApps "ip" module has a StreamDevice database and protocol file for the Lakeshore 336.  As Eric said it should work with either GPIB or Ethernet.
>
> This is not listed in the EPICS Hardware Modules Web page, but it should be.
>
> Mark
>
>
> -----Original Message-----
> From: tech-talk-bounces@aps.anl.gov [mailto:tech-talk-bounces@aps.anl.gov] On Behalf Of Elliott Wolin
> Sent: Thursday, February 09, 2012 3:29 PM
> To: tech-talk@aps.anl.gov
> Subject: Fwd: Re: Driver for Lake Shore Model 336 temperature controller
>
> Hi,
>
> Unfortunately the manual says there is no serial interface, just USB,
> IEEE-488, and Ethernet.  We're interested in using Ethernet.
>
> Thanks,
>
>
>
> On 02/09/2012 04:24 PM, Maren Purves wrote:
> >  Hi Elliott,
> >
> >  if it's anything like the LS 330 or LS 331 all you really needs is
> >  a serial line interface/driver and a database that talks to it.
> >
> >  Maren
> >
> >  Elliott Wolin wrote:
> > >  Hi,
> > >
> > >  Anyone know where to get a driver for a Lake Shore Model 336
> > >  temperature controller?  I'm particularly interested in a Linux
> > >  driver, not VxWorks.
> > >
> > >  Thanks,