Hi all,
I recently installed EPICS on a Raspberry Pi and I'm running a simple
IOC on it to interface to a motor controller.
Now I would like to do a benchmark test of EPICS on the Raspberry Pi to
get an idea of the limits of running EPICS on that particular hardware
and see how it compares to other system. That would also help me to
fine-tune the setup to get better performance.
Did anyone did such tests before? Or maybe have some pointers about
where I should look to get started on this?
By googling around I found:
http://www.aps.anl.gov/epics/modules/soft/realTimePerform/R1-1/testDescription.html
But I'm not sure if this is the right way to go for what I'm trying to do.
Thanks,
Andre
--
André Charbonneau
Research Computing Support Analyst
Shared Services Canada | National Research Council Canada
Services partagés Canada | Conseil national de recherches Canada
100 Sussex Drive | 100, promenade Sussex
Ottawa, Ontario K1A 0R6
Canada
[email protected]
Telephone | Téléphone: 613-993-3129
- Replies:
- Re: EPICS performance test/benchmark Andrew Johnson
- Navigate by Date:
- Prev:
Re: Fault Report and Tracking System enquiry? Benjamin Franksen
- Next:
Re: EPICS performance test/benchmark Andrew Johnson
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
<2013>
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: Fault Report and Tracking System enquiry? J. Lewis Muir
- Next:
Re: EPICS performance test/benchmark Andrew Johnson
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
<2013>
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|