Re: EPICS on RTEMS 4.11

[Kate Feng <kate007.feng@gmail.com>]

The question and answer are posted at RTEMS.  One example is at :
http://www.rtems.org/pipermail/rtems-users/2013-November/012218.html

Cheers,

Kate Feng

On Wed, Nov 27, 2013 at 2:45 AM, Till Straumann <strauman@slac.stanford.edu> wrote:

Nadia.

If you seek help then I suggest you provide as much information
about your situation as possible along with your request.

"I have a problem, please help"

does not give us any clue as to what exactly you were trying to do
and what exactly went wrong. Chances to get a reply increase
if you give more details. At the least, I recommend to attach a
***complete*** log of your failed attempt to build.

Please don't make the common mistake to just copy/paste the
few lines where the actual failure happens. It is very important that
you provide a complete log because in many cases the cause
for the failure can be determined from information that is contained
somewhere in the log (but not in the excerpt which the novice
solely believes to be relevant).

Good luck
- Till

On 11/27/2013 12:19 AM, Nadia Gruman wrote:

Hello all, 

Is anyone using EPICS with RTEMS 4.11? I am trying to build it for use with MVME5500, but I'm running into some issues and wondering if I should use 4.10. 

There are compilation issues I ran into on Linux 12.04, plus there seem to be no rtems addon packages for 4.11 on their git site. 

Thank you, 

Nadia Gruman