Hi Prerana,
I am confused about your paths. Can you please list:
- The path to EPICS base
- The path to asyn
- The path to serialTest
Please send the contents of the following file:
serialTest/configure/RELEASE
and send a directory listing of
asyn/dbd
Mark
________________________________
From: [email protected] [[email protected]] on behalf of Prerana Kankiya [[email protected]]
Sent: Wednesday, September 24, 2014 4:42 PM
To: [email protected]
Subject: Fwd: asyn build unsuccessful
Hi ,
I wanted to share the build errors I have been getting when trying to get a basic asyn app going.
1. First I installed the EPICS base package and build the base without errors
2. I installed asyn under a modules directory in the base package.
3. Then I followed instructions here <http://www.aps.anl.gov/epics/modules/soft/asyn/AsynRecordControl/AsynRecordControl.html>
4. When I try to execute step 4 , I get these errors
make -C ./configure install
make[1]: Entering directory `/cfs/ad/pkankiya/EPICS/base-3.14.12.4/serialTest/configure'
make -C O.linux-x86_64 -f ../Makefile TOP=../.. T_A=linux-x86_64 install
make[2]: Entering directory `/cfs/ad/pkankiya/EPICS/base-3.14.12.4/serialTest/configure/O.linux-x86_64'
perl ../../../bin/linux-x86_64/convertRelease.pl checkRelease
make[2]: Leaving directory `/cfs/ad/pkankiya/EPICS/base-3.14.12.4/serialTest/configure/O.linux-x86_64'
make[1]: Leaving directory `/cfs/ad/pkankiya/EPICS/base-3.14.12.4/serialTest/configure'
make -C ./serialTestApp install
make[1]: Entering directory `/cfs/ad/pkankiya/EPICS/base-3.14.12.4/serialTest/serialTestApp'
make -C ./src install
make[2]: Entering directory `/cfs/ad/pkankiya/EPICS/base-3.14.12.4/serialTest/serialTestApp/src'
make -C O.linux-x86_64 -f ../Makefile TOP=../../.. T_A=linux-x86_64 install
make[3]: Entering directory `/cfs/ad/pkankiya/EPICS/base-3.14.12.4/serialTest/serialTestApp/src/O.linux-x86_64'
echo "../O.Common/serialTestInclude.dbd : ../Makefile" >> serialTest.dbd.d
Expanding dbd
Can't open include file "drvVxi11.dbd"
Error at or before ""drvVxi11.dbd"" in file "../O.Common/serialTestInclude.dbd" line 2
dbExpand: Input errors, no output generated
make[3]: *** [../O.Common/serialTest.dbd] Error 1
make[3]: Leaving directory `/cfs/ad/pkankiya/EPICS/base-3.14.12.4/serialTest/serialTestApp/src/O.linux-x86_64'
make[2]: *** [install.linux-x86_64] Error 2
make[2]: Leaving directory `/cfs/ad/pkankiya/EPICS/base-3.14.12.4/serialTest/serialTestApp/src'
make[1]: *** [src.install] Error 2
make[1]: Leaving directory `/cfs/ad/pkankiya/EPICS/base-3.14.12.4/serialTest/serialTestApp'
make: *** [serialTestApp.install] Error 2
I am guessing I am building from wrong directory. Kindly suggest.
Thank you,
Prerana
- Replies:
- RE: asyn build unsuccessful Kankiya, Prerana
- References:
- Fwd: asyn build unsuccessful Prerana Kankiya
- Navigate by Date:
- Prev:
Fwd: asyn build unsuccessful Prerana Kankiya
- Next:
RE: asyn build unsuccessful Kankiya, Prerana
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
<2014>
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Fwd: asyn build unsuccessful Prerana Kankiya
- Next:
RE: asyn build unsuccessful Kankiya, Prerana
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
<2014>
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|