Hi Mooney,
I have some more question about the optics.
We are using the double crystal monochromator( geometry2 ).
I read your Instructions:http://www.aps.anl.gov/bcda/synApps/optics/opticsDocs.html
The difference between the kohzu2Graphic.opi and ours was that, we just have four motors: one for No.2 crystal pitch, one for No.2 crystal raw, one for No.2 crystal move vertically (to adjust the height of lights), and one for bragg angle.
When I set the st.cmd, I found that only "M_THETA, M_Y, M_Z,GEOM" could be set. I think these were different from our monochromator. I think we should set the mCHI2. And what was the GEOM means?
Could you give me some suggestion?
Regards,
Liang yx
- Replies:
- Re: double crystal monochromator Mooney, Tim M.
- Navigate by Date:
- Prev:
Re: Questions about Java channel access client Ebner Simon Gregor (PSI)
- Next:
Re: Questions about Java channel access client Ralph Lange
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
<2017>
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
RE: Questions about Java channel access client Shroff, Kunal
- Next:
Re: double crystal monochromator Mooney, Tim M.
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
<2017>
2018
2019
2020
2021
2022
2023
2024
|