Experimental Physics and
Industrial Control System

Hi all,

We built the BEPC cryogenic and vacuum control system, using ControlLogix PLC via Controlnet module (EPICS driver originally developed by SNS of USA), based on EPICS Base R3.13(VME_IOC), about ten years ago, at IHEP of China.

Now, we want to update the control software from Base R3.13 to Base R3.14 with keeping the existing hardware. However, I could't find any information about EPICS Base R3.14 VxWorks driver of VME ControlNet interface module(5136-CN-VME) from the website https://epics.anl.gov/modules/bus.php#VME%2dControlNet or https://ics-web.sns.ornl.gov/.

Has anyone converted VME ControlNet driver from R3.13 to R3.14? or knows the status of VME ControlNet driver support? 

Any advice or suggest is appreciated.

Best regards

Gang 

Replies:

Re: Driver support of VMM ControlNet interface module (5136-CN-VME) Kasemir, Kay

Navigate by Date:

Prev: Question about communications based on modbus tcp. lzf neu

Next: Re: Question about communications based on modbus tcp. Mark Rivers

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  <2018>  2019  2020  2021  2022  2023  2024 

Navigate by Thread:

Prev: 答复: Re: Question about communications based on modbus tcp. lzf neu

Next: Re: Driver support of VMM ControlNet interface module (5136-CN-VME) Kasemir, Kay

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  <2018>  2019  2020  2021  2022  2023  2024