Experimental Physics and
Industrial Control System

Steve Kinder - UKRI STFC <[email protected]> · Fri, 10 Aug 2018 11:13:15 +0000

Hi Han

Many thanks for that. We have some more recently purchased cards. Have swapped the card and now get dmesg output as below:

# dmesg | grep mrf
[    5.315364] mrf-pci 0000:81:00.0: Attaching MRF device w/o PLX bridge (00007011)
[    5.315415] mrf-pci 0000:81:00.0: irq 88 for MSI/MSI-X
[    5.315435] mrf-pci 0000:81:00.0: Using MSI
[    5.315615] mrf-pci 0000:81:00.0: MRF Setup complete

Seems better! Will continue from there again now.

Steve

________________________________
From: [email protected] <[email protected]> on behalf of Jeong Han Lee <[email protected]>
Sent: 10 August 2018 11:03:44
To: [email protected]
Subject: Re: mrfioc2 Linux driver

Hi Steve,

   If you have the permission to write the pciids database on your
system and if you want to do, please check the site:

   https://github.com/jeonghanlee/pciids

   It contains the recent up-to-date MRF HWs pciids, and so on alongside
the main database.

> # lspci -vv -nn -s 81:0.0
> 81:00.0 Signal processing controller [1180]: Xilinx Corporation Device [10ee:7011]
>      Subsystem: Device [1a3e:132c]

  According to the device id, you have MTCA EVR 300. However, according
to your email you have MRF PCIe-EVR-300DC. That means that you have old
intermediate MRF PCIe-EVR-300DC card. Please ask MRF to replace it with
the recent one.

   Few models have the wrong pciid accidentally.

   HTH,
   Han

Experimental Physics and Industrial Control System

Experimental Physics and
Industrial Control System