Tech-talk Digest, Vol 13, Issue 150

[peiyu Quan via Tech-talk <tech-talk@aps.anl.gov>]

Dear 

    I just start to study epics. I am installing EPICS 7.0 base in windows 10 system.

According to guide, Set EPICS_HOST_ARCH in startup directory:  

    set

Then in base directory:

gmake clean uninstall

gmake

The result show some "error 2". I don't know what mean it is. Whether I have success in installing it?

Please see red words.   

Thank you very much

Peiyu

The result as following: 

C:/Strawberry/c/bin/gmake -C ./configure install
gmake[1]: Entering directory 'C:/Users/peiyu/Desktop/epics_software/Experimental Physics and Industrial Control System/Base/base-7.0.2.1/configure'
perl -CSD ../src/tools/makeMakefile.pl O.windows-x64 ../..
perl -CSD -MExtUtils::Command -e mkpath O.Common
C:/Strawberry/c/bin/gmake -C O.windows-x64 -f ../Makefile TOP=../.. \
    T_A=windows-x64 install
gmake[2]: Entering directory 'C:/Users/peiyu/Desktop/epics_software/Experimental Physics and Industrial Control System/Base/base-7.0.2.1/configure/O.windows-x64'
gmake[2]: Nothing to be done for 'install'.
gmake[2]: Leaving directory 'C:/Users/peiyu/Desktop/epics_software/Experimental Physics and Industrial Control System/Base/base-7.0.2.1/configure/O.windows-x64'
gmake[1]: Leaving directory 'C:/Users/peiyu/Desktop/epics_software/Experimental Physics and Industrial Control System/Base/base-7.0.2.1/configure'
C:/Strawberry/c/bin/gmake -C ./src install
gmake[1]: Entering directory 'C:/Users/peiyu/Desktop/epics_software/Experimental Physics and Industrial Control System/Base/base-7.0.2.1/src'
C:/Strawberry/c/bin/gmake -C ./tools install
gmake[2]: Entering directory 'C:/Users/peiyu/Desktop/epics_software/Experimental Physics and Industrial Control System/Base/base-7.0.2.1/src/tools'
perl -CSD ../../src/tools/makeMakefile.pl O.windows-x64 ../../..
perl -CSD -MExtUtils::Command -e mkpath O.Common
C:/Strawberry/c/bin/gmake -C O.windows-x64 -f ../Makefile TOP=../../.. \
    T_A=windows-x64 install
gmake[3]: Entering directory 'C:/Users/peiyu/Desktop/epics_software/Experimental Physics and Industrial Control System/Base/base-7.0.2.1/src/tools/O.windows-x64'
gmake[3]: Nothing to be done for 'install'.
gmake[3]: Leaving directory 'C:/Users/peiyu/Desktop/epics_software/Experimental Physics and Industrial Control System/Base/base-7.0.2.1/src/tools/O.windows-x64'
gmake[2]: Leaving directory 'C:/Users/peiyu/Desktop/epics_software/Experimental Physics and Industrial Control System/Base/base-7.0.2.1/src/tools'
C:/Strawberry/c/bin/gmake -C template/base install
gmake[2]: Entering directory 'C:/Users/peiyu/Desktop/epics_software/Experimental Physics and Industrial Control System/Base/base-7.0.2.1/src/template/base'
perl -CSD C:/Users/peiyu/Desktop/epics_software/Experimental Physics and Industrial Control System/Base/base-7.0.2.1/bin/windows-x64/makeMakefile.pl O.windows-x64 ../../../..
Can't open perl script "C:/Users/peiyu/Desktop/epics_software/Experimental": No such file or directory
gmake[2]: *** [../../../configure/RULES_ARCHS:67: O.windows-x64] Error 2
gmake[2]: Leaving directory 'C:/Users/peiyu/Desktop/epics_software/Experimental Physics and Industrial Control System/Base/base-7.0.2.1/src/template/base'
gmake[1]: *** [../configure/RULES_DIRS:84: template/base.install] Error 2
gmake[1]: Leaving directory 'C:/Users/peiyu/Desktop/epics_software/Experimental Physics and Industrial Control System/Base/base-7.0.2.1/src'
gmake: *** [configure/RULES_DIRS:84: src.install] Error 2