Hi Martin,
Thanks for your response.
I need the ability to toggle the individual ports on and off. I contacted Planet’s distributor in the US (Versa Tech) to find out what is in the MIB file.
I’ll respond once I find out.
Cheers
Spencer
> On Jan 23, 2020, at 7:01 AM, Konrad, Martin <[email protected]> wrote:
>
> Hi Spencer,
>> I am looking to purchase a PoE Injector Hub such as this one:
> Like most enterprise network equipment this device supports SNMP. I bet
> you can read out power consumption etc. for each port. You could use the
> snmp-nscl support module. Maybe that satisfies your requirements?
>
> -Martin
>
> --
> Martin Konrad
> Facility for Rare Isotope Beams
> Michigan State University
> 640 South Shaw Lane
> East Lansing, MI 48824-1321, USA
> Tel. 517-908-7253
> Email: [email protected]
- References:
- Re: EPICS support for PoE Injector Hub Konrad, Martin via Tech-talk
- Navigate by Date:
- Prev:
RE: CAS-client thread issues in areaDetector IOC Mark Rivers via Tech-talk
- Next:
Building Matlab Channel Access with Base R3.15.7 Eric Norum via Tech-talk
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
<2020>
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: EPICS support for PoE Injector Hub Konrad, Martin via Tech-talk
- Next:
Read/Write waveforms using Channel Access C API Abdalla Ahmad via Tech-talk
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
<2020>
2021
2022
2023
2024
|