Experimental Physics and
Industrial Control System

Michael Davidsaver via Tech-talk <tech-talk at aps.anl.gov> · Fri, 1 May 2020 13:47:02 -0700

https://github.com/pjkundert/cpppo#ethernetip-controller-communications-simulator

I've no direct experience, but have come across references to it before.

On 5/1/20 1:36 PM, Shen, Guobao via Tech-talk wrote:
> Hi Pete,
> Thanks for your prompt reply.
> 
> Yes, I am looking for a Python library which is able to communicate with my IOC.
> I am wondering that there are libraries existed in our community already, therefore I don't have to start from scratch, and am able to save some development time.
> 
> Does your code for the CS800 controller support A-B EtherIP, therefore I can re-use it to communicate with my IOC?
> 
> Thanks,
> Guobao
> 
> 
> 
> On 5/1/20, 3:28 PM, "Jemian, Pete R." <jemian at anl.gov> wrote:
> 
>     I recently simulated an Oxford CS800 CryoStream Controller (UDP communications) using Python and the socket package.  You might try that route.
> 
>     ----------------------------------------------------------
>       Pete R. Jemian, Ph.D.                <jemian at anl.gov>
>       Beam line Controls and Data Acquisition
>       Advanced Photon Source,   Argonne National Laboratory
>       Argonne, IL  60439                   630 - 252 - 3189
>     -----------------------------------------------------------
>          Education is the one thing for which people
>             are willing to pay yet not receive.
>     -----------------------------------------------------------
> 
> 
>     ________________________________________
>     From: Tech-talk <tech-talk-bounces at aps.anl.gov> on behalf of Shen, Guobao via Tech-talk <tech-talk at aps.anl.gov>
>     Sent: Friday, May 1, 2020 3:26 PM
>     To: Tech-Talk
>     Subject: EtherNet/IP Simulator
> 
>     Hi,
>     Here at APS-U, we are looking for a mechanism to be able to simulator A-B PLC EtherNet/IP, therefore it would work with an EtherIP driver based IOC.
>     Does anyone have any suggestion whether there is any existing module which we can use?
> 
>     Thanks,
>     Guobao
> 

Experimental Physics and Industrial Control System

Experimental Physics and
Industrial Control System