Experimental Physics and
Industrial Control System

"Shen, Guobao via Tech-talk" <tech-talk at aps.anl.gov> · Fri, 1 May 2020 20:51:50 +0000

This is on the top 1 when I was googling it.
It seems promising, and still active (last commitment is < one year old).

I also found another simple one, but seems that not that much development for a while.

On 5/1/20, 3:48 PM, "Michael Davidsaver" <mdavidsaver at gmail.com> wrote:

    https://github.com/pjkundert/cpppo#ethernetip-controller-communications-simulator

    I've no direct experience, but have come across references to it before.

    On 5/1/20 1:36 PM, Shen, Guobao via Tech-talk wrote:
    > Hi Pete,
    > Thanks for your prompt reply.
    > 
    > Yes, I am looking for a Python library which is able to communicate with my IOC.
    > I am wondering that there are libraries existed in our community already, therefore I don't have to start from scratch, and am able to save some development time.
    > 
    > Does your code for the CS800 controller support A-B EtherIP, therefore I can re-use it to communicate with my IOC?
    > 
    > Thanks,
    > Guobao
    > 
    > 
    > 
    > On 5/1/20, 3:28 PM, "Jemian, Pete R." <jemian at anl.gov> wrote:
    > 
    >     I recently simulated an Oxford CS800 CryoStream Controller (UDP communications) using Python and the socket package.  You might try that route.
    > 
    >     ----------------------------------------------------------
    >       Pete R. Jemian, Ph.D.                <jemian at anl.gov>
    >       Beam line Controls and Data Acquisition
    >       Advanced Photon Source,   Argonne National Laboratory
    >       Argonne, IL  60439                   630 - 252 - 3189
    >     -----------------------------------------------------------
    >          Education is the one thing for which people
    >             are willing to pay yet not receive.
    >     -----------------------------------------------------------
    > 
    > 
    >     ________________________________________
    >     From: Tech-talk <tech-talk-bounces at aps.anl.gov> on behalf of Shen, Guobao via Tech-talk <tech-talk at aps.anl.gov>
    >     Sent: Friday, May 1, 2020 3:26 PM
    >     To: Tech-Talk
    >     Subject: EtherNet/IP Simulator
    > 
    >     Hi,
    >     Here at APS-U, we are looking for a mechanism to be able to simulator A-B PLC EtherNet/IP, therefore it would work with an EtherIP driver based IOC.
    >     Does anyone have any suggestion whether there is any existing module which we can use?
    > 
    >     Thanks,
    >     Guobao
    > 

Experimental Physics and Industrial Control System

Experimental Physics and
Industrial Control System