Re: Install EPICS on Raspberry pi and control motor

[Pete Jemian via Tech-talk <tech-talk at aps.anl.gov>]

motorPI is for motor controllers from Physik Instrumente.
https://github.com/search?q=org%3Aepics-modules+motorpi&type=code

On 1/29/2024 6:53 PM, Mark Rivers via Tech-talk wrote:
>   * What kind of motor module should I use? motorPI is for raspberry pi?
>
> You can use any type of RS-232 or Ethernet controller with the Raspberry Pi.  For example motorAcs supports the ACS MCB-4B serial controller, and Galil supports the Ethernet Galil controllers.
>
> Mark
>
> *From:*Tech-talk <tech-talk-bounces at aps.anl.gov> *On Behalf Of *whitetiger1123 via Tech-talk
> *Sent:* Wednesday, October 11, 2023 2:30 AM
> *To:* tech-talk at aps.anl.gov
> *Subject:* Install EPICS on Raspberry pi and control motor
>
> Hi, all. I have 1 question.
>
> I want to study EPICS and motor control, so I’ll make a small independent control system with raspberry pi B3 Model.
>
> What kind of motor module should I use? motorPI is for raspberry pi?
>
> Thanks for your help.
>
> Best and Regards,
>
> Baeg
--
----------------------------------------------------------
Pete R. Jemian, Ph.D.                 <jemian at anl.gov>
Beam line Controls and Data Acquisition (BC, aka BCDA)
Advanced Photon Source,    Argonne National Laboratory
Argonne, IL  60439                    630 - 252 - 3189
-----------------------------------------------------------
      Education is the one thing for which people
         are willing to pay yet not receive.
-----------------------------------------------------------