EPICS Home EPICS Controls Argonne National Laboratory

Experimental Physics and
Industrial Control System

Format page
for printing


Search Tech-talk
1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  <2024>  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  <2024> 
<== Date ==> <== Thread ==>
Subject: RE: ADPICam: epicsMutexOsdUnlock failed: ERROR Operation not permitted
From: Mark Rivers via Tech-talk <tech-talk at aps.anl.gov>
To: Fernando Ardana <fardana at icfo.net>, "tech-talk at aps.anl.gov" <tech-talk at aps.anl.gov>
Date: Wed, 14 Feb 2024 20:36:01 +0000

I recommend that you open this as an issue in ADPICAM.  Please include the following:

  • A screenshot of the top-level ADPICAM screen.
  • The complete output when the IOC starts up.

 

Mark

 

 

From: Tech-talk <tech-talk-bounces at aps.anl.gov> On Behalf Of Fernando Ardana via Tech-talk
Sent: Wednesday, February 14, 2024 4:06 AM
To: tech-talk at aps.anl.gov
Subject: ADPICam: epicsMutexOsdUnlock failed: ERROR Operation not permitted

 

Hi all,

I am having some problems with the ADPICAM module. I can connect and acquire images using the sample software provide it by Princeton. In Epics the camera is detected however cannot connect to it. After running by ioc I get:

PICamConfig("PICAM", 0, 0, 0, 0)
epicsMutex pthread_mutex_unlock epicsMutexOsdUnlock failed: ERROR Operation not permitted
epicsMutex pthread_mutex_unlock epicsMutexOsdUnlock failed: ERROR Operation not permitted

Running asynReport(20) I can see the camera:

PICam:report Initialized PICam Version 5.13.3.2211
----------------
PICam:report availableCamerasCount 1
Available Camera[0]
---PIXIS-XO: 2KB
---1
---E2V 2048 x 512 (CCD 42-10)(B)
---2702080007

Any idea of what is wrong?

 

Best and thanks,

Fernando

Replies:
Re: ADPICam: epicsMutexOsdUnlock failed: ERROR Operation not permitted Jörn Dreyer via Tech-talk
References:
ADPICam: epicsMutexOsdUnlock failed: ERROR Operation not permitted Fernando Ardana via Tech-talk
Navigate by Date:
Prev: RE: motor model 3 with binary commands PiCo 33 piezo CN30 controller Mark Rivers via Tech-talk
Next: Re: ADPICam: epicsMutexOsdUnlock failed: ERROR Operation not permitted Jörn Dreyer via Tech-talk
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  <2024> 
Navigate by Thread:
Prev: Re: ADPICam: epicsMutexOsdUnlock failed: ERROR Operation not permitted Mark Rivers via Tech-talk
Next: Re: ADPICam: epicsMutexOsdUnlock failed: ERROR Operation not permitted Jörn Dreyer via Tech-talk
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  <2024> 
ANJ, 15 Feb 2024 Valid HTML 4.01! · Home · News · About · Base · Modules · Extensions · Distributions · Download ·
· Search · EPICS V4 · IRMIS · Talk · Bugs · Documents · Links · Licensing ·