Experimental Physics and
Industrial Control System

1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 <2024> 2025 2026	Index	1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 <2024> 2025 2026
<== Date ==>		<== Thread ==>

Subject:	how to inititial VAL field in motor record
From:	"Tran, Phi Dung via Tech-talk" <[email protected]>
To:	"[email protected]" <[email protected]>
Date:	Wed, 24 Jul 2024 17:14:32 +0000

Hi,

I am trying the initialize the motor record field(VAL, "1.6050") field, with field(PINI, "YES") and I am not having success.

Is this allowed.

record(motor,"MonoBend1"){

field(DTYP, "Soft Channel")

field(PREC, "4")

#field(DVAL, "1.6050")

field(VAL, "1.6050")

field(PINI, "YES")

}

Alex

Replies:: Re: how to inititial VAL field in motor record Peterson, Kevin M. via Tech-talk

Navigate by Date:: Prev: Re: dbGetField AI.DPVT Ralph Lange via Tech-talk; Next: IOC with Normative Types Dave Bracey via Tech-talk; Index: 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 <2024> 2025 2026
Navigate by Thread:: Prev: Alarms' timestamp in EPICS Base Eusebio Naif Al-Soliman Fuentes via Tech-talk; Next: Re: how to inititial VAL field in motor record Peterson, Kevin M. via Tech-talk; Index: 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 <2024> 2025 2026

ANJ, 19 Mar 2026