Experimental Physics and
Industrial Control System

1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 <2025>	Index	1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 <2025>
<== Date ==>		<== Thread ==>

Subject:	Re: Problem with drvAsynIPPortConfigure
From:	Ralph Lange via Tech-talk <tech-talk at aps.anl.gov>
To:	EPICS Tech Talk <tech-talk at aps.anl.gov>
Date:	Fri, 19 Sep 2025 03:35:45 +0200

I think you have the order of things in the startup file wrong.

The block

## Register all support components
dbLoadDatabase "dbd/mdrive_1IOC.dbd"
mdrive_1IOC_registerRecordDeviceDriver pdbbase

loads the dbd file and registers all Record, Device and Driver Support modules with EPICS. This includes the registration of iocShell commands.

Before this block is run, the iocShell does not know the asyn-related commands.

Cheers,
~Ralph

Replies:: Re: Problem with drvAsynIPPortConfigure Dariush Hampai via Tech-talk

References:: Problem with drvAsynIPPortConfigure Dariush Hampai via Tech-talk

Navigate by Date:: Prev: Re: Problem with drvAsynIPPortConfigure Henrique F. Simoes via Tech-talk; Next: Re: Help with bumpless IOC reboot, record linking and initialization concepts Maren Purves via Tech-talk; Index: 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 <2025>
Navigate by Thread:: Prev: Re: Problem with drvAsynIPPortConfigure Henrique F. Simoes via Tech-talk; Next: Re: Problem with drvAsynIPPortConfigure Dariush Hampai via Tech-talk; Index: 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 <2025>

ANJ, 22 Sep 2025