RE: Granville-Phillips 830 Vacuum Quality Monitor

["Wang, SuYin Grass via Tech-talk" <tech-talk at aps.anl.gov>]

Hi, Has anyone had any IOC solution for this? I have a hard time finding a USB 2.0 UI online, too.  I am wondering if the SCPI command would work on Linux.  Thank you. Grass RE: Granville-Phillips 830 Vacuum Quality Monitor
From:	"Heesterman, Peter J" <Peter.Heesterman at ukaea.uk>
To:	"'Sue Witherspoon'" <withers at jlab.org>, Tech-talk <tech-talk at aps.anl.gov>, "'Saraf, Shweta'" <shweta at slac.stanford.edu>
Date:	Thu, 13 Oct 2016 16:12:23 +0000

Hi Sue,

I am presently working on this project.

I have a working IOC that is based around G-P's Windows-only SDK.

I firmly intend to provide a cross-platform solution; this is dependent on the company enabling me to do so by means on an NDA for their existing C# source code.
I have an ongoing negotiation with them, on this question. 

I refer also to http://www.aps.anl.gov/epics/tech-talk/2016/msg00794.php.

Hope this helps,

Peter.

-----Original Message-----
From: tech-talk-bounces at aps.anl.gov [mailto:tech-talk-bounces at aps.anl.gov] On Behalf Of Sue Witherspoon
Sent: 13 October 2016 17:00
To: Tech-talk
Subject: Granville-Phillips 830 Vacuum Quality Monitor

Greetings,

One of our experiments has chosen to use the Granville-Phillips 830 VQM for monitoring the scattering chamber vacuum. Has anyone developed an EPICS driver for this device. It appears to come with a USB 2.0 windows UI. But maybe, someone has a linux solution?


--
Sue Witherspoon
Staff Computer Scientist
Accelerator Controls Software
757-269-7579
Thomas Jefferson National Accelerator Facility