Argonne National Laboratory

Experimental Physics and
Industrial Control System

1994  <19951996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  Index 1994  <19951996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020 
<== Date ==> <== Thread ==>

Subject: Recommended setting for XyCom 566 Analog input module?
From: Tony Cox - (415)926-3105 <tcox@ssrl01.slac.stanford.edu>
Date: Fri, 05 May 1995 17:31:02 PST
Hello All,

	Here's a novice question. I'm starting to set up the hardware for
our beamline (all dealings with EPICS so far have been theoretical(!)), and
so I'm trying to interface my first module, the XVME-566.

	Naturally, there are numerous jumpers and options. CSR addresses,
data RAM addresses, interrupt levels etc. Quite a jumble for the first
module.

	Can anyone give me a quick, simple, tutorial on what the appropriate
values should be, and how these might relate to the DCT VME parameters
Card/Signal/Parameter?

	The EPICS device & record support information that I have (basically
that on the  WWW) doesn't go into this in sufficient detail. Any help would be
much appreciated....

	Tony

--------------------------------------------------------------------------------
Dr Anthony D Cox
Computer Systems Specialist
Stanford Synchrotron Radiation Laboratory
Stanford Linear Accelerator Center
MS 69, Box 4349
Stanford CA 94305
tcox@ssrl01.slac.stanford.edu
--------------------------------------------------------------------------------


Navigate by Date:
Prev: RE: VME to CAMAC interface module Mark Rivers
Next: Re: VME to CAMAC interface module watson
Index: 1994  <19951996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020 
Navigate by Thread:
Prev: Re: VME to CAMAC interface module watson
Next: Re: Recommended setting for XyCom 566 Analog input module? Ned Arnold
Index: 1994  <19951996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020 
ANJ, 10 Aug 2010 Valid HTML 4.01! · Home · News · About · Base · Modules · Extensions · Distributions · Download ·
· Search · EPICS V4 · IRMIS · Talk · Bugs · Documents · Links · Licensing ·