> The design of the original CEBAF device support would support any CAMAC
> interface for which the ESONE/ANSII Standard CAMAC routines were available.
> This includes a number of branch highway interfaces as well as the Kinetic
> Systems K-bus mentioned above.
>
> We used this at CEBAF for both the serial highway and kbus interface.
> It did not include LAM support (added by LANL), but I'm not sure if the
> hardware independence is completely preserved -- that is, the ability to
> use any existing CAMAC library without modifications.
I believe this hardware independence has been preserved. I have loaded the
latest EPICS CAMAC package onto an IOC which was running only vxWorks (and not
EPICS) and it runs fine.
____________________________________________________________
Mark Rivers (312) 702-2279 (office)
CARS (312) 702-9951 (secretary)
Univ. of Chicago (312) 702-5454 (FAX)
5640 S. Ellis Ave. (708) 922-0499 (home)
Chicago, IL 60637 [email protected] (Internet)
- Replies:
- Re: [Q] CAMAC Serial Driver. watson
- Navigate by Date:
- Prev:
Re: [Q] CAMAC Serial Driver. watson
- Next:
Re: [Q] CAMAC Serial Driver. watson
- Index:
1994
1995
<1996>
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: [Q] CAMAC Serial Driver. Johnny Tang
- Next:
Re: [Q] CAMAC Serial Driver. watson
- Index:
1994
1995
<1996>
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|