Bill Brown writes:
>
> There was some talk at the CERN meeting about support for IP packs under
> _EPICS_ (as opposed to under HIDEOS). Has anyone done anything besides
> the CANbus module done at Greenwich? Is there a list somewhere (anywhere)
> of supported IPACs? If any?
>
> TIA
>
> -bill
At CFHT we have developed support for the GreenSprings IP OCTAL 232, 422, and
485 serial I/O modules. The code is built but largely untested (we
expect the hardware RSN...). Systems based on this interface will be on
the telescope by Feb '97.
We use Andrew Johnson's drvIpac for managing the carrier board (VIPC
610) and the actual driver for the SCC 2698 UARTs is strongly
based/ported from the drivers in HiDEOS (Thanks, Jim!).
Aloha,
Peregrine
-------------------------------------------------------------------------------
Peregrine M. McGehee http://www.cfht.hawaii.edu/~mcgehee
Telescope Control Systems Group Canada-France-Hawaii Telescope
(808) 885-3178 P.O. Box 1597, Kamuela, Hawaii 96743
- References:
- EPICS vs. IP packs Bill Brown
- Navigate by Date:
- Prev:
EPICS vs. IP packs Bill Brown
- Next:
Re: EPICS vs. IP packs Kay-Uwe Kasemir
- Index:
1994
1995
<1996>
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
EPICS vs. IP packs Bill Brown
- Next:
Re: EPICS vs. IP packs watson
- Index:
1994
1995
<1996>
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|