Experimental Physics and
Industrial Control System

I have been using the ACS step-pac stepper motor drives with high
current, low voltage SLO-SYN motors and found that I am not getting
the expected torque.  In partucular with a 6Amp/phase MO93-FD11 where
I should be getting around 450 oz-in I seem to be only getting around
100 oz-in (torque measurements are very very approximate!).  Has anyone
else had similar problems, or any ideas as to what may be happening?

Larry
-- 
==================================================================
Laurence Lurio
APS/ANL
Sector Number 8
Building 400                               VOICE:     630-252-0281
9700 South Cass Avenue                       FAX:     630-252-0282
Argonne, IL 60439-1749                     EMAIL:  [email protected]
==================================================================

Navigate by Date:

Prev: EDD/DM: Passing multiple arguments for color rule definition ? Marian ZUREK

Next: Re: EDD/DM: Passing multiple arguments for color rule definition ? Deb Kerstiens

Index: 1994  1995  1996  <1997>  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 

Navigate by Thread:

Prev: Re: EDD/DM: Passing multiple arguments for color rule definition ? Deb Kerstiens

Next: Re: EDD/DM: Passing multiple arguments for color rule definition ? Anna M. Estes

Index: 1994  1995  1996  <1997>  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024