Experimental Physics and
Industrial Control System

Dave Reid <[email protected]> · Thu, 15 Jan 1998 09:43:59 -0800

Marty Kraimer wrote:
> 
> While investigating an ioc problem we (actually Frank Lenkszus) noticed
> that the mv167 board support package does not enable parity checking.
> 
> Has anyone enable parity checking on the mv167?
> What changes to the board support package are necessary?
> Are there any problem doing this?
> 

	I'm actaully working on this as we speak.  After much
going back and forth with WindRiver, they have sent me the two
following fixes:

Fix 1:

====================================================================

#include "vxWorks.h"
#include "sioLib.h"
#include "drv/sio/cd2400Sio.h"

extern SIO_CHAN *sioDesc[];

void evenParitySet(int channel)
    {

    CD2400_QUSART * pQusart;

    pQusart = ((CD2400_CHAN *) sioDesc[channel]) -> pQusart;
    *MPCC_COR1 = COR1_EVEN_PARITY | COR1_PARITY | COR1_8BITS;
    }

====================================================================

Fix 2:

=====================================================================
Here is a second version, using sysSerialChanGet:

#include "vxWorks.h"
#include "sioLib.h"
#include "drv/sio/cd2400Sio.h"
#include "sysLib.h"

void evenParitySet(int channel)
    {

    CD2400_QUSART * pQusart;

    pQusart = ((CD2400_CHAN *) sysSerialChanGet(channel)) -> pQusart;
    *MPCC_COR1 = COR1_EVEN_PARITY | COR1_PARITY | COR1_8BITS;
    }
=====================================================================

	I'm just in the process of confirming that these
fixes will work.

dave
=============================================================
Dave Reid                   [email protected]
UW Medical Center           (206)548-4536
Radiation Oncology Dept.    	
Seattle, WA

Experimental Physics and Industrial Control System

Experimental Physics and
Industrial Control System