Folks,
I have been following this thread about loading the vxWorks symbol table with
great interest, since I have what appears to be a related problem.
I have a bunch of MVME167 boards which boot up quickly, and specifically take
only about 5 seconds to load the symbol table. I also have one MVME162 which
is configured identically to the 167's in terms of user name, password, etc.
However, the 162 takes 50 seconds to load the symbol table, i.e. it is 10
times slower in this step than the 167's. All other parts of the boot process
go quickly. Any ideas (besides a sniffer?)
Thanks,
Mark Rivers
- Replies:
- Re: Problem booting ioc w/ rsh instead of ftp Ralph Lange
- Navigate by Date:
- Prev:
MEDM on Linux Garrett D. Rinehart
- Next:
Re: Problem booting ioc w/ rsh instead of ftp Ralph Lange
- Index:
1994
1995
1996
1997
<1998>
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: Problem booting ioc w/ rsh instead of ftp Andrew Johnson
- Next:
Re: Problem booting ioc w/ rsh instead of ftp Ralph Lange
- Index:
1994
1995
1996
1997
<1998>
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|