Experimental Physics and Industrial Control System
|
I'm writing driver support for the KineticSystems V345 output
register and using the V215 driver that comes with EPICS 3.13.4 as a
pattern. This is my first try at a VXI module. The IOC is a KSC
V150 and builds with hkbaja60 routines.
The drvVxi routine does not recognize that the V345 module is
present. The vxiMemProbe call in open_vxi_device returns a status
value of -1 for all logical addresses (the V345 is set to logical
address 1). Therefore epvxiResourceMangerOK never becomes TRUE
causing the device support to never fully initialize.
Is some sort of initialization for the V150 required before iocInit runs?
- Replies:
- RE: VXI driver support Jeff Hill
- Navigate by Date:
- Prev:
Re: mbbiRecord undefined state Marty Kraimer
- Next:
RE: VXI driver support Jeff Hill
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
<2002>
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
RE: Problems building 3.14.0beta1 Rarback, Harvey
- Next:
RE: VXI driver support Jeff Hill
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
<2002>
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|
ANJ, 10 Aug 2010 |
·
Home
·
News
·
About
·
Base
·
Modules
·
Extensions
·
Distributions
·
Download
·
·
Search
·
EPICS V4
·
IRMIS
·
Talk
·
Bugs
·
Documents
·
Links
·
Licensing
·
|