Rok Sabjan <[email protected]> writes:
> Hi to everybody!
> I'm having a peculiar problem. I have a number of strings (around 50)
and
> I would like to display one of them, depending on number parameter.
This
> is no problem with numbers, as sel record can be used. The amount of
> strings also does not allow the usage of mbbi record.
> Any suggestions?
> Thanx.
Once I've written the routine (on C) to be used in Subroutine EPICS
record which prints
a message (from the associated message table of _any_ size) according to
the number got from
VAL field of SUB record to another record. The message table is also C
file. It cannot be
changed in run time. Printing is done with dbPut call. The name of the
target record is taken
from one of link fields (currently from FLNK field). If you are still
interesting in an alternative
solution, please, contact me.
Regards,
Vladislav
- Navigate by Date:
- Prev:
Re: ISEG VHQ204L Driver Burkhard W. Kolb
- Next:
Sorry - just a test Andy Foster
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
<2002>
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: sel record for strings mooney
- Next:
about building MEDM Zhao Zhuo
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
<2002>
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|