Re: SBS IP module support?

[Marty Kraimer <mrk@aps.anl.gov>]

It doesn't have your modules but synapps has support for ip330 (ADC). ipUnidig 
(Digital IO), and dac128V (DAC).

See

http://www.aps.anl.gov/aod/bcda/synApps/index.php



Laznovsky, Michael wrote:
> Hi- does anyone have or know where to find EPICS support for the following SBS
> IP modules (or similar ones)?  Or could someone point me to existing s/w that
> might be used as a starting point...
>
> 	SBS IP-DAQ12-LG: IndustryPack with 16 multiplexed ADC, 4 DAC 12-bit, with
> 	selectable low gain, 100 kHz - http://sbs.com/products/510
>
> 	SBS IP-DIO48-ET: IndustryPack with 48 TTL level tristate digital I/O lines
> 	with pullups, interrupts, debounce and ESD -http://sbs.com/products/494
>
> I've found the APS IPAC page (http://www.aps.anl.gov/asd/people/anj/ipac/), but
> nothing about these particular modules.
>
> thanks,
> Mike
>
> -----
> Michael P. Laznovsky                         mailto:lazmo@slac.stanford.edu
> Application Software Developer, ESD                     ofc: (650) 926-2924
> Stanford Linear Accelerator Center, MS-46               fax: (650) 926-3515
> 2575 Sand Hill Road, Menlo Park CA 94025 USA   http://www.slac.stanford.edu